[1 point) The following table gives values of the differentiable function y = f(x). 012345678910 123-4.21-1-2135 Estimate the x-values of critical points of (x) on the interval 0 < x < 10. Classity each critical point as a local maximum, local minimum, or neither Enter your critical points as comma-separated xvalue, classification pairs. For example, if you found the critical points x = -2 and x = 3, and that the first was a local minimum and the second nother a minimum nor a maximum, you should enter (-2,min), (3,neither). Enter none if they are no critica/ points) critical points and classifications Now assume that the table gives values of the continuous function y = f'(x) (instead of F(x)). Estimate and classify critical points of the function f(x) critical points and classifications:

well, according the Cavalieri's Principle, the volume of the oblique cone will be the same volume as the non-oblique cone, so

[tex]\textit{volume of a cone}\\\\ V=\cfrac{\pi r^2 h}{3}~~ \begin{cases} r=radius\\ h=height\\[-0.5em] \hrulefill\\ r=9\\ h=16 \end{cases}\implies V=\cfrac{\pi (9)^2(16)}{3}\implies V=432\pi ~cm^3[/tex]

You need to add 2125 milliliters of water to fill the square aquarium completely.

We need to find the volume of the square aquarium and then determine the additional water needed to fill it completely. Here are the steps:

1. Convert the given length to meters: 15 cm = 0.15 m
2. Calculate the volume of the square aquarium: Volume = length × width × height. Since it's a square aquarium, all sides are equal, so Volume = 0.15 m × 0.15 m × 0.15 m = 0.003375 cubic meters.
3. Convert the volume to milliliters: 0.003375 cubic meters × 1,000,000 mL/cubic meter = 3375 mL.
4. Calculate the additional water needed: Total volume - Current volume = 3375 mL - 1250 mL = 2125 mL.

You need to add 2125 milliliters of water to fill the square aquarium completely.

Learn more about volume,

https://brainly.com/question/27710307

#SPJ11

Answer:

54% × 50000= 27000, the answer is 27000

If the base and slant height both are divided by a factor of 3, the surface area will get multiplied by factor, option b, 3².

Here we are given that the square pyramid has a base of 3m and a slant height of 6 m.

The surface area formula for a square pyramid with square edge a and slant height h is

a² + 2a√(a²/4  + h²)

Here, a = 3 and h = 6. Hence we get

3² + 2X3√(3²/4  + 6²)

= 46.108

Now the base and slant height are multiplied by 3. Hence we will get

9a² + 6a√(9a²/4  + 9h²)

414.972

Now, dividing both obtained we will get

414.972/46.108

= 9

= 3²

Hence, it should be multiplied by 3².

To learn more about Surface Area visit

https://brainly.com/question/29298005

#SPJ4

Answer:

10 adult tickets cost £75 , 20 child tickets cost £60

Step-by-step explanation:

let a be the cost of an adult ticket and c the cost of a child ticket , then

4a + c = 33 → (1)

2a + 7c = 36 → (2)

multiplying (2) by - 2 and adding to (1) will eliminate a

- 4a - 14c = - 72 → (3)

add (1) and (3) term by term to eliminate a

0 - 13c = - 39

- 13c = - 39 ( divide both sides by - 13 )

c = 3

substitute c = 3 into either of the 2 equations and solve for a

substituting into (1)

4a + 3 = 33 ( subtract 3 from both sides )

4a = 30 ( divide both sides by 4 )

a = 7.5

the cost of an adult ticket is £7.50

then 10 adult tickets cost 10 × £7.50 = £75

the cost of a child ticket is £3

the cost of 20 child tickets is 20 × £3 = £60

Mario can afford to buy a maximum of 12 hamburgers from the local store.

Let's assume Mario can buy "h" hamburgers.

The cost of each hamburger is $2.90, and Mario wants to buy "h" hamburgers, so the total cost of hamburgers would be 2.90h.

He is also buying one packet of hamburger rolls, which costs $4.75.

Therefore, the total amount he can spend at the store must be less than or equal to his budget of $39.55.

Putting it all together, the inequality representing this situation is:

2.90h + 4.75 ≤ 39.55

To find out how many hamburgers Mario can afford to buy, we need to solve the inequality:

2.90h + 4.75 ≤ 39.55

Subtracting 4.75 from both sides of the inequality:

2.90h ≤ 34.80

Next, divide both sides of the inequality by 2.90:

h ≤ [tex]\frac{34.80 }{ 2.90}[/tex]

Simplifying the right side:

h ≤ 12

Therefore, Mario can afford to buy a maximum of 12 hamburgers from the local store.

Learn more about the cost of each hamburger.

brainly.com/question/17455565

#SPJ11

The remaining part of the given shape was drawn about to its symmetry. The complete shape obtained is similar to the Hexagon shape.

Given half shape has the following points,

The points which are missing to complete the other symmetry are:

By joining the above missing points, we can obtain the full symmetry of the shape.

To rotate the obtained shape of the Hexagon to 180° about the origin, we have to inverse the above complete symmetry points. It simply means if the above points are having positive values, we can inverse it to negative and vice-versa.

By rotating the obtained shape to 180° about the origin, we can obtain the below following points,

The images are attached below for the complete symmetry shape.

To know more about symmetry,

https://brainly.com/question/29545496

#SPJ1

Given question is not having enough required information, so I am attaching the image of the shape which we have to work on,

The extremum of the function is a minimum at x = -2.5

The given function is k(x)(300+10x)(5-0.2x).

To check for symmetry about the y-axis, we replace x with -x in the given function and simplify as follows:

k(-x)(300-10x)(5+0.2x)

To check for symmetry about the x-axis, we replace y with -y in the given function and simplify as follows:

k(x)(300+10x)(5-0.2x) = -k(x)(-300-10x)(5+0.2x)

To find these points, we set the function equal to zero and solve for x:

k(x)(300+10x)(5-0.2x) = 0

This equation has three solutions:

x = 0

x = -30

x = 25.

The midpoint of the line segment connecting these points is

(x1+x2) ÷ 2 = (-30+25) ÷ 2 = -2.5.

To determine the type of extremum at this point, we need to check the sign of the second derivative. The second derivative of the function is:

k(x)(-1200+x)(0.2x+15)

Since the function is symmetric about the x-axis, the second derivative will be negative at the extremum if it is maximum and positive if it is a minimum.

When x = -2.5, the second derivative is positive, which means that the function has a minimum at x = -2.5.

To learn more about extremum follow the link:

https://brainly.com/question/31343270

#SPJ1

On performing an ANOVA test the p-value obtained is less than the chosen significance level, hence it is verified that the sample standard deviations use of ANOVA allow the the means to compare the population means. Since ANOVA test shows significant difference therefore, it suggests that these factors play a role in influencing the evaluation of the product.

To verify that the sample standard deviations use of ANOVA allows means to compare the population means, discuss the terms ANOVA, sample standard deviation, population means.

1. ANOVA (Analysis of Variance): ANOVA is a statistical method used to compare the means of multiple groups to determine if there's a significant difference between them.

2. Sample Standard Deviation: Sample standard deviation is a measure of how spread out the values in a sample are. It helps estimate the population standard deviation, which is necessary for calculating the F statistic in ANOVA.

a. Calculate the sample means and standard deviations for each group.
b. Perform an ANOVA test using calculated means and standard deviations.
c. Interpret results: If p-value obtained from the ANOVA test is less than the chosen significance level (e.g., 0.05), it means there is a significant difference between population means.

Regarding the effect of the subject's gender and attractiveness of the confederate on the evaluation of the product, if the ANOVA test shows a significant difference, it suggests that these factors play a role in influencing the evaluation of product. You can further analyze the data by performing post-hoc tests to identify which specific groups differ significantly.

Know more about ANOVA here:

https://brainly.com/question/15084465

#SPJ11

Answer:

2.41

Step-by-step explanation:

postive = add negative = subtract

The cost of one apple is $2.15.

To find the cost of one apple, we can set up a system of equations with the given information. Let's use A for the cost of one apple and B for the cost of one banana:

1) 4A + 9B = $12.70
2) 8A + B = $17.70

Now, we can solve this system of equations. We can multiply equation 1 by 2 to match the number of apples in equation 2:

1) 8A + 18B = $25.40

Now subtract equation 2 from the modified equation 1:

(8A + 18B) - (8A + B) = $25.40 - $17.70
17B = $7.70

Now, divide by 17 to find the cost of one banana:
B = $7.70 / 17 = $0.45

Now that we know the cost of one banana, we can substitute B in equation 2 to find the cost of one apple:

8A + ($0.45) = $17.70
8A = $17.25
A = $17.25 / 8 = $2.15

So, the cost of one apple is $2.15.

Learn more about equation,

https://brainly.com/question/29174899

#SPJ11

The perimeter of the semicircular region is about 28.27 meters.

We know that the semicircular region is half of a circle.

Let's assume that the radius of the circle is r meters. Then the circumference of the circle is 2πr meters, and the perimeter of the semicircular region is half of that, which is πr meters.

We are given that the radius of the circle is 9 meters, so we can plug that in to get:

The perimeter of the semicircular region = πr

= π(9)

≈ 28.27

Rounding to the nearest hundredth, the perimeter of the semicircular region is about 28.27 meters.

To learn more about “perimeter” refer to the https://brainly.com/question/19819849

#SPJ11

(a) To find a non-zero vector orthogonal to the plane through the points P, Q, and R, we need to take the cross product of two vectors in the plane. One way to do this is to subtract one point from another to get a vector, and then take the cross product of the two resulting vectors. For example, we could subtract point Q from point P to get the vector PQ, and subtract point R from point P to get the vector PR. Then, taking the cross product of PQ and PR will give us a vector orthogonal to the plane:PQ = <-3, 0, -9>PR = <-3, -6, 0>PQ x PR = <54, 27, 18>Therefore, the vector <54, 27, 18> is orthogonal to the plane through the points P, Q, and R.(b) To find the area of the parallelogram with sides PQ and PR, we need to find the length of the projection of PQ onto PR, and then multiply by the length of PR. The projection of PQ onto PR is given by:proj_PR(PQ) = (PQ · u) uwhere u is a unit vector in the direction of PR, and · denotes the dot product. Since PR = <-3, -6, 0>, we can take u = <-1/sqrt(10), -3/sqrt(10), 0>, which is a unit vector in the direction of PR. Then:proj_PR(PQ) = (PQ · u) u = (-3/sqrt(10)) <-1/sqrt(10), -3/sqrt(10), 0> = <9/10, 27/10, 0>The length of this vector is sqrt((9/10)^2 + (27/10)^2 + 0^2) = 3sqrt(10), so the area of the parallelogram is:A = |PQ| |proj_PR(PQ)| = sqrt((-3)^2 + 0^2 + (-9)^2) * 3sqrt(10) = 27sqrt(10)

For more similar questions on topic

https://brainly.com/app/ask?q=

#SPJ11

A. Orthogonal vector = (0, -27, 18)

B. The area of the parallelogram with sides PQ and PR is 1053 square units.

(a) To find a non-zero vector orthogonal to the plane through points P, Q, and R, we need to compute the cross product of vectors PQ and PR.

Vector PQ = Q - P = (-3, 0, -9)
Vector PR = R - P = (-3, -6, 0)

Cross product PQ x PR = (i, j, k) × ((-3, 0, -9), (-3, -6, 0))
= i(0 * 0 - (-9) * (-6)) - j(-3 * 0 - (-3) * (-9)) + k(-3 * -6 - 0 * (-3))
= i(0) - j(27) + k(18)
Orthogonal vector = (0, -27, 18)

(b) To find the area of the parallelogram with sides PQ and PR, we can use the magnitude of the cross product of PQ and PR.

Magnitude of PQ x PR = ||(0, -27, 18)||
= √(0^2 + (-27)^2 + 18^2)
= √(729 + 324)
= √1053

The area of the parallelogram with sides PQ and PR is 1053 square units.

To learn more about parallelogram, refer below:

https://brainly.com/question/29147156

#SPJ11

The  evaluated probability that Sue travel to France this summer is 0.67, under the condition that she just returned from her winter vacation in Mexico.

For the required problem we have to apply  Bayes' theorem.

Let  us consider that A is the event that Sue goes to France in the summer and B be the event that Sue goes to Mexico in the winter.

Now,

P(A and B) = P(B) × P(A|B)

= 0.40

P(B) = 0.60

Therefore now we have to find P(A|B),  which means the probability that Sue traveled to France after coming from Mexico

Applying Bayes' theorem,

P(A|B) = P(B|A) × P(A) / P(B)

It is given that P(B|A) = P(A and B) / P(A), then

P(A|B) = (P(A and B) / P(A)) × P(A) / P(B)

P(A|B) = P(A and B) / P(B)

Staging the values

P(A|B) = 0.40 / 0.60

P(A|B) = 0.67

To learn more about probability

https://brainly.com/question/13604758

#SPJ4

The complete question is

The probability that Sue will go to Mexico in the winter and to France in the summer is 0. 40. the probability that she will go to mexico in the winter is 0. 60. find the probability that she will go to France this summer, given that she just returned from her winter vacation in Mexico.

The pattern of the data indicates a linear relationship or strong positive correlation between the average house prices and average monthly payments.

The monthly payment for a house costing $450,000 is $3,600.

A formulate connecting the average monthly payment with the average house price in slope-intercept form is y = 0.008x.

In Mathematics, a proportional relationship can be represented by this equation:

y = kx

Where:

Next, we would determine the constant of proportionality (k) as follows:

Constant of proportionality (k) = y/x

Constant of proportionality (k) = 8/1000

Constant of proportionality (k) = 1/125 or 0.008.

Therefore, a formula that connects the two variables is given by;

y = kx

y = 0.008x

When average house price (x) = $450,000, the average monthly payment (y) is given by:

y = 0.008(450,000)

y = $3,600.

In conclusion, we can logically deduce that the pattern of the data shows a linear relationship or strong positive correlation between the average house prices (x) and average monthly payments (y) because as the average house prices (x) increases, the average monthly payments (y) also increases.

Read more on proportionality here: brainly.com/question/12866878

#SPJ1

From the given data, the statement "A higher percentage of 8th graders than 7th graders prefer Math/Science" is correct. So, correct option is C.

To calculate the relative frequencies, we need to divide the frequency of each category by the total number of responses.

For 7th grade:

Relative frequency of English: 38/116 = 0.3276

Relative frequency of History: 36/116 = 0.3103

Relative frequency of Math/Science: 28/116 = 0.2414

Relative frequency of Other: 14/116 = 0.1207

For 8th grade:

Relative frequency of English: 47/182 = 0.2582

Relative frequency of History: 45/182 = 0.2473

Relative frequency of Math/Science: 72/182 = 0.3956

Relative frequency of Other: 18/182 = 0.0989

From the data, we can see that a higher percentage of 8th graders prefer Math/Science than 7th graders. Therefore, the statement "A higher percentage of 8th graders than 7th graders prefer Math/Science" correctly describes the association between favorite subject and grade.

The statements "A higher percentage of 8th graders than 7th graders prefer History" and "A higher percentage of 7th graders than 8th graders prefer English" are incorrect as the relative frequencies for these subjects are similar in both grades.

Overall, we can conclude that the choice of favorite subject is not strongly associated with the grade level of the students.

So, correct option is C.

To learn more about frequencies click on,

https://brainly.com/question/27562468

#SPJ4

Complete question is:

Calculating the relative frequencies from the data given in the table. Choose all that correctly describe an association between favorite subject and grade.

A) A higher percentage of 8th graders than 7th graders prefer History.

B) A higher percentage of 7th graders than 8th graders prefer English.

C) A higher percentage of 8th graders than 7th graders prefer Math/Science.

The limit of A. x^(2^x) as x approaches 0 is 1, and the limit of B. 2^x - 1 as x approaches 0 is ln 2.

A. To find the limit of A. x^(2^x) as x approaches 0, we can take the natural logarithm of both sides and use the fact that ln(1 + a) is approximately equal to a for small values of a. This gives us:

ln(A. x^(2^x)) = 2^x ln x

ln(A. x^(2^x)) / ln x = 2^x

Taking the limit as x approaches 0, the right-hand side goes to 1, and using the continuity of the natural logarithm, we have:

ln(A) = 0

A = 1

Therefore, the limit of A. x^(2^x) as x approaches 0 is 1.

B. To find the limit of B. 2^x - 1 as x approaches 0, we can use L'Hopital's Rule:

lim x→0 (2^x - 1)

= lim x→0 (ln 2 * 2^x / ln 2)

= ln 2 * lim x→0 (2^x / ln 2)

= ln 2 * (lim x→0 e^(x ln 2) / ln 2)

= ln 2 * (lim x→0 e^(x ln 2 - ln 2) / (ln 2 - ln 2))

= ln 2 * (lim x→0 e^(ln 2 * (x - 1)) / 1)

= ln 2 * e^0

= ln 2

Therefore, the limit of B. 2^x - 1 as x approaches 0 is ln 2.

For more questions like Limit click the link below:

https://brainly.com/question/12207539

#SPJ11

If the terminal side of angle λ intersects the unit circle at point (-0. 358, 0. 934), the approximate decimal value of cot(λ) is -0.383.

To find the approximate decimal value of cot(λ), we first need to determine the values of x and y on the unit circle. Since the given point (-0.358, 0.934) lies on the unit circle, we can use the Pythagorean theorem to find the missing side:

x² + y² = 1
(-0.358)² + (0.934)² = 1
0.128 + 0.872 = 1
1 = 1

Therefore, we have x = -0.358 and y = 0.934. Since cot(λ) = cos(λ)/sin(λ), we can use the values of x and y to calculate the cosine and sine of λ:

cos(λ) = x = -0.358
sin(λ) = y = 0.934

Substituting these values into the formula for cot(λ), we get:

cot(λ) = cos(λ)/sin(λ) = -0.358/0.934 ≈ -0.383

Therefore, the approximate decimal value of cot(λ) is -0.383.

More on decimal value: https://brainly.com/question/27152521

#SPJ11

To determine what students want served in the cafeteria, the cook asks students in Ms. Andrew’s first period class. The sample used by the cook is known as Convenience.

The sample used is known as convenience sample. The cook only asks students in Ms. Andrews’ first period class which is a convenient and accessible group to ask but this method of sampling may not be representative of the entire student population as it only includes students in one class.

So, the results may not accurately reflect what all students want to be served in the cafeteria, hence, more representative sample could be obtained by using a simple random sample or systematic sample where  student in the population has an equal chance of being selected.

Read more about convenience sample

brainly.com/question/28046586

#SPJ1

The monthly rent for the apartment would be $1238.84 in the fifth year.

The problem states that the monthly rent for an apartment is $925. To calculate the rent for the second year, we need to increase this amount by 6%.

To do this, we first need to calculate 6% of $925. We can do this by multiplying 0.06 (which is equivalent to 6%) by $925:

6% of $925 = 0.06 × $925 = $55.50

So, the rent for the second year would be:

$925 + $55.50 = $980.50

To find the rent for the third year, we need to increase the rent for the second year by 6%. We can follow the same process:

6% of $980.50 = 0.06 × $980.50 = $58.83

So, the rent for the third year would be:

$980.50 + $58.83 = $1039.33

To find the rent for any year n, we use the formula:

Rent for year n = $925 × (1 + 0.06)^n

In this formula, (1 + 0.06) represents the multiplier used to calculate the new rent each year.

For example, the multiplier for the second year is 1 + 0.06 = 1.06, and the multiplier for the third year is 1.06 × 1.06 = 1.1236 (rounded to four decimal places).

To find the rent for the fifth year, we plug in n = 5:

Rent for year 5 = $925 × (1 + 0.06)^5 = $925 × 1.3382 = $1238.84 (rounded to the nearest cent)

So, the monthly rent for the apartment would be $1238.84 in the fifth year.

Learn more about rent

brainly.com/question/26268428

#SPJ11

The difference in masses is equal to 1,728 grams.

In Mathematics and Geometry, the volume of a rectangular prism can be calculated by using the following formula:

Volume of a rectangular prism = L × W × H

Where:

By substituting the given dimensions (parameters) into the formula for the volume of a rectangular prism, we have the following;

Volume of rectangular prism = 9 × 3 × 8

Volume of rectangular prism = 216 cm³.

Mass of gold = density × volume

Mass of gold = 19.3 × 216

Mass of gold = 4,168.8 grams.

Mass of lead = 11.3 × 216

Mass of lead = 2,440.8 grams.

Difference in masses = 4,168.8 grams - 2,440.8 grams.

Difference in masses = 1,728 grams.

Read more on volume of prism here: brainly.com/question/21012007

#SPJ1

The area of ΔSTU is approximately 6.7 square centimeters.

To find the area of a triangle, we can use the formula A = (1/2)bh, where b is the base of the triangle and h is the height. In this case, we know that u is the base of the triangle, so we need to find the height.

To do this, we can use the sine function, which tells us that sin(6°) = h/u. Rearranging this equation, we get h = usin(6°). We can then substitute u and sin(6°) into the formula for the area to get

A = (1/2)(3.4)(3.4sin(6°)) ≈ 6.7 square centimeters.

Learn more about Trigonometry

brainly.com/question/31896723

#SPJ11

The sales price divided by total cost is 123%.

Based on the information provided, I can help you complete the table:

Purchase Price | Load | Total Cost | Sales Price | Sales Price ÷ Total Cost (nearest 1%)
ABC = $425     |   0  |   $425     |   $850      |        200%
DEF = $600     | $375 |   $975     |   $1,200    |        123%

For mutual fund ABC, there was no load, so the total cost is equal to the purchase price. The sales price ÷ total cost is 200% (nearest 1%). For mutual fund DEF, the total cost includes the $375 load, resulting in a total cost of $975. The sales price ÷ total cost is 123% (nearest 1%).

To learn more about sales, refer below:

https://brainly.com/question/29857652

#SPJ11

Answer: V = 2527.2 in^3

Step-by-step explanation:

V = Bh

that is, Volume = base area x height

the base area is the hexagon, and the height is given as 12.

Think of dividing the hexagon into 6 equal triangles, with height 7.8

so the area of all 6 triangles, (effectively the area of the hexagon), will be:

6(0.5 x 9 x 7.8) = 210.6 in^2

multiply this by the height to get the volume:

210.6 x 12 = 2527.2 in^3

thats it!

V = 2527.2 in^3

Answer:

B) Unique

Step-by-step explanation:

J coordinates = (0,6)

K coordinates = ( 9, -9)

L coordinates = ( -9, -9)

Unique rule: 1/3x , 1/3y

Which means 1\3 times the x coordinate and 1/3 times the y coordinate

J,K,L after applying the unique rule equals

J= (0,2)

K= (3,-3)

L= (-3,-3)

Which lines up with J’ and K’ and L’.

Making the “unique” statement true, dilation= (1/3x, 1/3y)

Please mark brainliest :D

Type I error in this situation would mean option a. Concluding that the bags are being under filled when they actually aren't.

A Type I error occurs when the null hypothesis (in this case, that the true mean net weight is 14 ounces) is rejected when it is actually true. In other words, it is the error of concluding that there is evidence for the alternative hypothesis (that the true mean net weight is less than 14 ounces) when there is not.

In this situation, if a Type I error is made, it would mean that the bags are being under filled (i.e. the true mean net weight is less than 14 ounces) when in reality they are not. This would lead to incorrect conclusions and potentially negative consequences for the manufacturer.

It's important to note that the probability of making a Type I error can be controlled by choosing an appropriate level of significance (usually denoted by alpha) for the hypothesis test. For example, if alpha is set at 0.05, there is a 5% chance of making a Type I error.

In summary, a Type I error in this situation would mean incorrectly concluding that the bags are being under filled when they actually are not, and the probability of making such an error can be controlled by choosing an appropriate level of significance for the hypothesis test.

To know more about Type I error, visit:

https://brainly.com/question/24320889#

#SPJ11

In ∆DEF, DG−→− bisects ∠EDF. ∆FDG is similar to ∆EDG; ∆FDG and ∆EDG may not be congruent, but they are similar by the ASA Similarity Postulate. Therefore, the correct option is B.

1. Since DG bisects ∠EDF, it means that ∠EDG = ∠FDG. This is the Angle Bisector Theorem.

2. In triangles FDG and EDG, we know that ∠FDG = ∠EDG (from step 1) and ∠DFG = ∠DEG (both are vertical angles and therefore congruent).

3. Now we have two pairs of congruent angles: ∠FDG = ∠EDG and ∠DFG = ∠DEG.

4. According to the (Angle-Side-Angle) or  ASA Similarity Postulate, if two angles in one triangle are congruent to two angles in another triangle, then the triangles are similar. Therefore, ∆FDG is similar to ∆EDG.

Hence, the correct answer is option B: Yes; ∆FDG and ∆EDG may not be congruent, but they are similar by the ASA Similarity Postulate.

Learn more about ASA Similarity:

https://brainly.com/question/30091621

#SPJ11

The calculated value of the number of cows that can graze on 720 acres of land is 18

From the question, the statements that can be used in our computation are given as

The area of grazing needed by each cow is 40 acres

From the above statement, the equation to use is

Cows = Area of land/Unit rate of cows

By substituting the given values in the above equation, we have the following equation

Cows = 720/40

Evaluate

Cows = 18

Hence, the calculated number of cows is 18

Read more about proportion at

https://brainly.com/question/1781657

#SPJ1

Answer:

1) 1/2 + 1/4 = 2/4 + 1/4 = 3/4

2) To add these fractions, you need to find a common denominator. The smallest common multiple of 7 and 9 is 63, so we can write:

3/7 * 9/9 + 2/9 * 7/7 = 27/63 + 14/63 = 41/63

3) To add these fractions, you need to find a common denominator. The smallest common multiple of 5 and 15 is 15, so we can write:

3/5 * 3/3 + 1/15 * 1/1 = 9/15 + 1/15 = 10/15

But we can simplify this fraction by dividing both the numerator and denominator by 5:

10/15 = 2/3

4) To add these fractions, you need to find a common denominator. The smallest common multiple of 9 and 8 is 72, so we can write:

1/9 * 8/8 + 7/8 * 9/9 = 8/72 + 63/72 = 71/72

5) To add these fractions, you need to find a common denominator. The smallest common multiple of 7 and 21 is 21, so we can write:

6/7 * 3/3 + 2/21 * 1/1 = 18/21 + 2/21 = 20/21

6) To add these fractions, we need to find a common denominator first. The smallest number that both 6 and 10 divide into is 30. So, we convert 4/6 to 20/30 by multiplying both the numerator and denominator by 5, and we convert 2/10 to 3/15 by multiplying both the numerator and denominator by 3. Now we have:

20/30 + 3/15 = (20x1 + 3x2)/(30x2) = 23/60

Therefore, 4/6 + 2/10 = 23/60.

7) To add these fractions, we need to find a common denominator first. The smallest number that both 11 and 22 divide into is 22. So, we convert 1/11 to 2/22 by multiplying both the numerator and denominator by 2, and we convert 3/22 to 3/22 (it is already in terms of 22). Now we have:

2/22 + 3/22 = (2 + 3)/22 = 5/22

Therefore, 1/11 + 3/22 = 5/22.

8) To add these fractions, we need to find a common denominator first. The smallest number that both 4 and 20 divide into is 20. So, we convert 1/4 to 5/20 by multiplying both the numerator and denominator by 5, and we convert 8/20 to 8/20 (it is already in terms of 20). Now we have:

5/20 + 8/20 = (5 + 8)/20 = 13/20

Therefore, 1/4 + 8/20 = 13/20.

9) To add these fractions, we need to find a common denominator first. The smallest number that both 7 and 9 divide into is 63. So, we convert 4/7 to 24/63 by multiplying both the numerator and denominator by 3, and we convert 2/9 to 14/63 by multiplying both the numerator and denominator by 7. Now we have:

24/63 + 14/63 = (24 + 14)/63 = 38/63

Therefore, 4/7 + 2/9 = 38/63.

10) To add these fractions, we need to find a common denominator first. The smallest number that both 10 and 30 divide into is 30. So, we convert 6/7 to 18/30 by multiplying both the numerator and denominator by 3, and we convert 2/30 to 1/15 by multiplying both the numerator and denominator by 15. Now we have:

18/30 + 1/15 = (18x1 + 1x2)/(30x2) = 37/30

Therefore, 6/7 + 2/21 = 37/30.

There are 4.097 x [tex]10^43[/tex] paths from (0,0) to (90,160) that pass through (80,70).

To calculate the number of paths from (0,0) to (90,160) while passing through (80,70), we need to break down the problem into smaller steps.

First, we can calculate the number of paths from (0,0) to (80,70) and then

multiply that by the number of paths from (80,70) to (90,160).

To go from (0,0) to (80,70), we need to take 80 steps to the right and 70 steps up, which gives us a total of 150 steps. The order in which we take these steps doesn't matter, so we can think of it as choosing 70 steps out of 150 to be up. This can be calculated using the binomial coefficient, which gives us (150 choose 70) = 2.364 x  [tex]10^43[/tex]

To go from (80,70) to (90,160), we need to take 10 steps to the right and 90 steps up, which gives us a total of 100 steps. Using the same method as above, the number of paths from (80,70) to (90,160) is (100 choose 10) = 17,310,309.

Multiplying these two values together, we get the total number of paths from (0,0) to (90,160) that pass through (80,70):

(2.364 x 10^34) x (17,310,309) = 4.097 x  [tex]10^43[/tex]

Therefore, there are 4.097 x [tex]10^43[/tex] paths from (0,0) to (90,160) that pass through (80,70).

Learn more about binomial coefficient,

https://brainly.com/question/31229700

#SPJ4