My teacher gave me this question for homework need help


A copper sulfate solution contained 0. 100 moles of copper sulfate dissolved in 0. 500 dm3 of water. Calculate the mass of copper sulfate in 30. 0 cm3 of this solution. Relative formula mass (Mr): CuSO4 = 159. 5

The half-life of the radioactive isotope is B) about 7.4 hours based on the given information of its initial mass at 1 pm and its mass at 7 pm.

To determine the half-life of the isotope, we can use the radioactive decay formula:

[tex]N = N0 * (1/2)^(t/T)[/tex]

where N is the final amount, N0 is the initial amount, t is the time elapsed, T is the half-life.

We can plug in the values given:

N0 = 5.6 g

N = 3.2 g

t = 6 hours (from 1 pm to 7 pm)

T = unknown

[tex]3.2 = 5.6 * (1/2)^(6/T)[/tex]

Solving for T:

[tex](1/2)^(6/T) = 3.2/5.6[/tex]

[tex]ln[(1/2)^(6/T)] = ln(3.2/5.6)[/tex]

[tex](6/T)ln(1/2) = ln(3.2/5.6)[/tex]

[tex]6/T = -0.633[/tex]

T = -9.47 hours

Since the half-life can't be negative, we made a mistake somewhere in the calculations. One common mistake is forgetting to use the natural logarithm (ln) instead of the common logarithm (log). Using the correct logarithm, we get:

[tex]ln[(1/2)^(6/T)] = ln(3.2/5.6)[/tex]

[tex](6/T)ln(1/2) = ln(3.2/5.6)[/tex]

[tex](6/T)(-0.693) = -0.601[/tex]

[tex]T = 6*(-0.693)/(-0.601) = 6*1.151 = 6.906[/tex]

Therefore, the half-life is about 6.9 hours, which is closest to option B) about 7.4 hours.

To know more about the half-life refer here :

https://brainly.com/question/24710827#

#SPJ11

There are several definitions of acids and bases, and each definition provides a unique perspective on their properties and behaviors.

Arrhenius Definition:

According to the Arrhenius definition, an acid is a substance that dissociates in water to form hydrogen ions (H+), while a base is a substance that dissociates in water to form hydroxide ions (OH-).

For example, hydrochloric acid (HCl) dissociates in water to form H+ and Cl- ions:

HCl → H+ + Cl-

On the other hand, sodium hydroxide (NaOH) dissociates in water to form Na+ and OH- ions:

NaOH → Na+ + OH-

Characteristics for identification:

Acids typically have a sour taste and can cause a burning sensation on the skin. Bases have a bitter taste and can feel slippery to the touch. They also typically have a higher pH value (greater than 7) in aqueous solutions.

Bronsted-Lowry Definition:

According to the Bronsted-Lowry definition, an acid is a substance that donates a proton (H+) to another molecule or ion, while a base is a substance that accepts a proton (H+) from another molecule or ion.

In this reaction, acetic acid is the acid because it donates a proton, while water is the base because it accepts a proton.

Characteristics for identification:

Acids and bases in the Bronsted-Lowry sense are identified by the presence or absence of a hydrogen ion. An acid must contain a hydrogen ion that can be donated to a base, while a base must have an available lone pair of electrons to accept a hydrogen ion.

Lewis Definition:

According to the Lewis definition, an acid is a substance that accepts a pair of electrons, while a base is a substance that donates a pair of electrons.

In this reaction, boron trifluoride is the acid because it accepts a pair of electrons, while ammonia is the base because it donates a pair of electrons.

Characteristics for identification:

Acids and bases in the Lewis sense are identified by their electron-pair accepting or donating abilities. An acid must be able to accept a pair of electrons, while a base must be able to donate a pair of electrons.

Learn more about acid Visit: brainly.com/question/2927542

#SPJ4

Correct Question:

Explain the different definitions of acid and base. Give an example of each and the characteristics of your identification.

The percent yield of Ca₃(PO₄)2 is 100.6%. This means that the actual yield is slightly higher than the theoretical yield, which could be due to experimental error or incomplete reaction.

To calculate the theoretical yield of Ca₃(PO₄)2, we need to determine the limiting reagent in the reaction. We can do this by calculating the amount of Ca₃(PO₄)2 that can be produced from each reactant, using stoichiometry and the molar masses of the compounds.

The balanced chemical equation for the reaction is:

3 CaCl₂ + 2 Na₃PO₄ → Ca₃(PO₄)2 + 6 NaCl

The molar mass of CaCl₂ is 110.98 g/mol, and the molar mass of Ca₃(PO₄)2 is 310.18 g/mol.

First, we convert the mass of CaCl₂ to moles:

0.515 g CaCl₂ / 110.98 g/mol = 0.00464 mol CaCl₂

Next, we use stoichiometry to calculate the moles of Ca₃(PO₄)2 that can be produced from the CaCl₂:

0.00464 mol CaCl₂ × (1 mol Ca₃(PO₄)2 / 3 mol CaCl₂) = 0.00155 mol Ca₃(PO₄)2

Finally, we convert the moles of Ca₃(PO₄)2 to grams:

0.00155 mol Ca₃(PO₄)2 × 310.18 g/mol = 0.481 g Ca₃(PO₄)2 (theoretical yield)

Therefore, the theoretical yield of Ca₃(PO₄)2 is 0.481 g.

To calculate the percent yield, we use the formula:

percent yield = (actual yield / theoretical yield) × 100%

The actual yield is given as 0.484 g. Plugging in the values, we get:

percent yield = (0.484 g / 0.481 g) × 100% = 100.6%

to know more about limiting reagent refer here:

https://brainly.com/question/11848702#

#SPJ11

To calculate the specific heat capacity of cadmium, we can use the formula:

Q = mcΔT, Where Q is the heat transfer, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature. Since the heat gained by the water equals the heat lost by the cadmium, we can set up the following equation:
mc_cadmium (Tfinal - Tinitial_cadmium) = mc_water (Tfinal - Tinitial_water).

Given:
m_cadmium = 65.6 g
Tinitial_cadmium = 100.0°C
m_water = 25.0 g
Tinitial_water = 23.0°C
Tfinal = 32.7°C
c_water = 4.18 J/g°C (specific heat capacity of water)

Now we can solve for c_cadmium:

65.6 * c_cadmium * (32.7 - 100.0) = 25.0 * 4.18 * (32.7 - 23.0)

Solving for c_cadmium:

c_cadmium = (25.0 * 4.18 * (32.7 - 23.0)) / (65.6 * (32.7 - 100.0))
c_cadmium ≈ 0.227 J/g°C

So the specific heat capacity of cadmium is approximately 0.227 J/g°C.

For more questions on: heat

https://brainly.com/question/30738335

#SPJ11

The cell potential for the given unbalanced reaction is 2.334 V.

To calculate the cell potential, we first need to balance the reaction:
Mg(s) + 2Fe³⁺(aq) → Mg²⁺(aq) + 2Fe(s)

Next, we find the difference in standard reduction potentials:
E°(Mg²⁺/Mg) = -2.37 V
E°(Fe³⁺/Fe) = -0.036 V
E°cell = E°(Mg²⁺/Mg) - E°(Fe³⁺/Fe) = -2.37 - (-0.036) = -2.334 V

Now, we apply the Nernst equation to account for non-standard conditions:
E = E° - (RT/nF)ln(Q)
where R = 8.314 J/mol·K, T = 298 K, n = 2 moles of electrons, F = 96485 C/mol, and Q is the reaction quotient.

Q = [Mg²⁺]/[Fe³⁺]² = (0.000612)/(1.29)²

E = -2.334 - (8.314 * 298)/(2 * 96485) * ln(0.000612/1.29²)
E ≈ 2.334 V

Thus, the cell potential for the given reaction is 2.334 V.

To know more about Nernst equation click on below link:

https://brainly.com/question/31593791#

#SPJ11

Answer:

Lion and cheetah - Competition

Mistletoe on a tree - Parasitism

Coyote eating rabbit- Predatation

Remora and Shark - Mutualism

Clownfish and Anemone - Relationship

Explanation:

E. None of these compounds should be soluble in pentane. Pentane is a nonpolar solvent, meaning it will dissolve other nonpolar molecules, but not polar or ionic molecules.

Acetic acid is polar, while pentanol and ethyl methyl ketone have polar functional groups. Benzene is nonpolar, but larger than pentane, so it is unlikely to dissolve well in it.

Acetic acid is a colorless liquid organic compound with the chemical formula CH3COOH. It is also known as ethanoic acid and is a weak acid. It is a pungent-smelling liquid that is commonly used as a solvent, as a food preservative, and in the manufacture of various chemicals. Acetic acid is the main component of vinegar, and it is also used as a reagent in laboratory experiments. In the body, acetic acid is produced during the metabolism of carbohydrates and fats.

Visit here to learn more about pentane brainly.com/question/1550379

#SPJ11

Based on the nitrogen content, you should choose ammonium phosphate as it contains a higher percentage of nitrogen (28.2%) compared to ammonium sulfate (21.2%), which will potentially yield a larger corn crop for ethanol production.

To determine which fertilizer, ammonium sulfate or ammonium phosphate, would yield the largest amount of corn for ethanol production, you need to consider the nitrogen content in each fertilizer.

Ammonium sulfate has the chemical formula (NH4)2SO4. It contains 2 nitrogen atoms (N), 8 hydrogen atoms (H), 1 sulfur atom (S), and 4 oxygen atoms (O). The molar mass of nitrogen is 14 g/mol, so the nitrogen content in ammonium sulfate is:
2(N) = 2(14 g/mol) = 28 g/mol.

The molar mass of ammonium sulfate is 132.14 g/mol. To calculate the percent of nitrogen in ammonium sulfate, divide the nitrogen mass by the total molar mass and multiply by 100:
(28 g/mol) / (132.14 g/mol) × 100 = 21.2%.

Ammonium phosphate has the chemical formula (NH4)3PO4. It contains 3 nitrogen atoms, 12 hydrogen atoms, 1 phosphorus atom, and 4 oxygen atoms. The nitrogen content in ammonium phosphate is:
3(N) = 3(14 g/mol) = 42 g/mol.

The molar mass of ammonium phosphate is 149.09 g/mol. To calculate the percent of nitrogen in ammonium phosphate, divide the nitrogen mass by the total molar mass and multiply by 100:
(42 g/mol) / (149.09 g/mol) × 100 = 28.2%.

Based on the nitrogen content, you should choose ammonium phosphate as it contains a higher percentage of nitrogen (28.2%) compared to ammonium sulfate (21.2%), which will potentially yield a larger corn crop for ethanol production.

To know more about ethanol production refer here: https://brainly.com/question/31574140#

#SPJ11

Answer:

Carbon dioxide:

One carbon circle with 2 oxygen circles connected to it.

Ammonia:

One nitrogen circles with 3 hydrogen circles connected to it.

Oxygen:

2 oxygen circles connected to each other.

Hydrogen:

2 hydrogen circles stuck together

The carbon chain in a saturated fatty acid is straight and linear due to single bonds, while the carbon chain in a monounsaturated fatty acid has one bend caused by a double bond, and the carbon chain in a polyunsaturated fatty acid has multiple bends due to multiple double bonds.

Compare the shape of the carbon chain in a saturated fatty acid, a monounsaturated fatty acid, and a polyunsaturated fatty acid.
1. Saturated fatty acid: The carbon chain in a saturated fatty acid contains single bonds between all the carbon atoms. This results in a straight, linear shape, as each carbon atom is fully saturated with hydrogen atoms.

2. Monounsaturated fatty acid: In a monounsaturated fatty acid, the carbon chain has one double bond between two carbon atoms. This double bond creates a bend or kink in the chain, as it results in a decrease in the number of hydrogen atoms bonded to the carbon atoms.

3. Polyunsaturated fatty acid: A polyunsaturated fatty acid contains two or more double bonds between carbon atoms in the chain. Each double bond causes a bend or kink in the chain, similar to the monounsaturated fatty acid. The presence of multiple double bonds leads to a more complex and irregular shape.

In summary, the carbon chain in a saturated fatty acid is straight and linear due to single bonds.

To know more about Polyunsaturated fatty acid:

https://brainly.com/question/12409149

#SPJ11

A forensic investigator relies on rigor mortis and livor mortis to determine the time of death, which respectively refers to the body stiffening and going through predictable stages and bluish-purple blotches appearing due to gravity causing the blood to flow downward after death.

A forensic investigator relies on two primary clues from a corpse to determine the time of death: rigor mortis and livor mortis. Rigor mortis refers to the process where the body stiffens after death, going through predictable stages that typically begin around two hours post-mortem. This occurs due to the lack of ATP in muscles, causing them to contract and become rigid. The stiffness progresses and peaks around 12 hours after death, then gradually subsides within the next 24-48 hours.

Livor mortis, on the other hand, is caused by gravity influencing the blood flow in the body after death. As the blood stops circulating, it flows downward and accumulates in the dependent areas, resulting in bluish-purple blotches appearing on the skin due to the lack of oxygen. This process usually starts around 30 minutes to 2 hours after death and becomes more pronounced within 6-12 hours.

By observing the extent and progression of rigor mortis and livor mortis, a forensic investigator can estimate the time of death, aiding in the investigation process.

Know more about rigor mortis here:

https://brainly.com/question/29194734

#SPJ11

Two important techniques used in titration that provide accurate results are the use of standardized solutions and the proper use of indicators and ignoring these techniques can lead to inaccurate conclusions, wasted resources, and potentially hazardous outcomes.

The use of standardized solutions is important because it ensures that the concentration of the solution being used is known with a high degree of accuracy. Standardization involves carefully preparing a solution of known concentration and then using it to determine the concentration of another solution.

The proper use of indicators is also crucial in titration because it helps to detect the endpoint of the reaction. Indicators are substances that undergo a color change when the reaction reaches a certain point. The choice of indicator depends on the reaction being studied, and the wrong indicator can result in an inaccurate endpoint determination.

To learn more about titration follow the link:

https://brainly.com/question/31271061

#SPJ4

The complete question is:

There are many aspects to the technique known as titration that are extremely important if results are to be accurate. In traditional or authentic laboratory setting, these techniques are important and sometimes delicate. List two techniques used in this lab that provided you with the most accurate possible results. Describe why these techniques are important and how ignoring the techniques would affect the lab.

Technique #1: Why technique is important?

Technique #2: Why is technique #2 important?

To prepare a 250mL aqueous solution using 8.00g of solid NaOH, we will need to dissolve the solid NaOH in water. NaOH is a highly soluble compound, and it readily dissolves in water to form an aqueous solution.

To begin, we need to determine the concentration of the solution we want to prepare. This can be done by calculating the molarity of the solution. Molarity is defined as the number of moles of solute per liter of solution.

To calculate the molarity, we first need to determine the number of moles of NaOH present in the 8.00g of solid. This can be done using the formula:
moles = mass / molar mass

The molar mass of NaOH is 40.00 g/mol (23.00 g/mol for Na and 16.00 g/mol for O and H). Thus, the number of moles of NaOH present in 8.00g of solid is:
moles = 8.00 g / 40.00 g/mol = 0.200 mol

Next, we need to determine the volume of water required to prepare a 250mL solution of this concentration. This can be done using the formula:

moles = concentration x volume
Rearranging the formula, we get:
volume = moles / concentration

The desired concentration is not given, so let's assume we want a 0.5 M solution. Using this concentration and the calculated number of moles, the volume of water required can be calculated as:
volume = 0.200 mol / 0.5 M = 0.400 L or 400 mL

However, we want to prepare a 250mL solution, so we need to adjust the volume of water required. We can do this using the formula:

concentration = moles / volume
Rearranging the formula, we get:
volume = moles / concentration

Plugging in the values, we get:
volume = 0.200 mol / 0.5 M = 0.400 L or 400 mL
To prepare a 250mL solution, we can use 250 mL of water and dissolve the 0.200 mol of NaOH in it. This will give us a 0.8 M solution. We can verify this by calculating the concentration using the formula:

concentration = moles / volume
Plugging in the values, we get:
concentration = 0.200 mol / 0.250 L = 0.8 M

Therefore, to prepare a 250mL aqueous solution using 8.00g of solid NaOH, we need to dissolve the solid in 250mL of water. The resulting solution will have a concentration of 0.8 M.

To  know more about aqueous  refer here

https://brainly.com/question/30215562#

#SPJ11

In order to respond to this query, it is necessary to first define a saturated solution. When a solution reaches its maximal solubility, no more solute can dissolve in the solvent, creating a saturated solution.

Potassium iodide is the solute in this scenario, while water is the solvent. Potassium iodide is most soluble in water at a temperature of around 74.2 grammes per 100 grammes of water.

We must thus add 19.2 additional grammes of KI to the solution in order to make it saturated. This implies that there would be 74.2 grammes of KI in the entire solution.

Learn more about KI   at:

https://brainly.com/question/30033275

#SPJ1

We need 1.26 liters of hydrogen gas to react with 9.0 g of bromine.

To solve this problem, we need to use the balanced chemical equation for the reaction between hydrogen gas (H₂) and bromine (Br₂):

[tex]H_2 + Br_2 - > 2HBr[/tex]

According to the stoichiometry of this equation, one mole of Br₂ reacts with one mole of H₂ to produce two moles of HBr. Therefore, we need to determine the number of moles of Br₂ in 9.0 g, and then use the mole ratio to find the number of moles of H₂ required.

Finally, we can convert the number of moles of H₂ to liters using the ideal gas law.

First, we need to calculate the number of moles of Br₂ in 9.0 g:

The molar mass of Br₂ is 2(79.90 g/mol) = 159.80 g/mol

The number of moles of Br₂ in 9.0 g is:

9.0 g / 159.80 g/mol = 0.0563 mol Br₂

Next, we use the mole ratio from the balanced equation to find the number of moles of H₂ required:

According to the balanced equation, one mole of Br₂ reacts with one mole of H₂, so we need 0.0563 moles of H₂.

Finally, we can use the ideal gas law to convert the number of moles of H₂ to liters:

The ideal gas law is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

We can assume standard temperature and pressure (STP), which is 0°C (273.15 K) and 1 atm.

At STP, one mole of an ideal gas occupies 22.4 L.

Therefore, the volume of H2 required is:

V = (0.0563 mol) x (22.4 L/mol) = 1.26 L

Therefore, we need 1.26 liters of hydrogen gas to react with 9.0 g of bromine.

learn more about temperature here

https://brainly.com/question/26866637

#SPJ1

When calcium metal reacts with chlorine gas, they form an ionic compound known as calcium chloride. The chemical formula for calcium chloride is [tex]CaCl2[/tex].

During the reaction, calcium metal loses two electrons to form [tex]Ca2+[/tex] ions while chlorine gas accepts these electrons to form [tex]Cl-[/tex] ions.

The electrostatic attraction between the positively charged [tex]Ca2+[/tex] ions and negatively charged [tex]Cl-[/tex] ions results in the formation of the solid ionic compound, calcium chloride.

Calcium chloride is a white crystalline solid that is highly soluble in water. It has a wide range of applications in industries such as food, pharmaceuticals, and de-icing of roads.

Additionally, it is used as a drying agent in laboratory procedures and as a source of calcium ions in biological and medical applications.

To know more about calcium chloride refer to-

https://brainly.com/question/664620

#SPJ11

An unmanned spacecraft is a type of spacecraft that is designed and programmed to operate without human crew on board.

These spacecraft are sent from Earth to explore various objects in space, such as planets, moons, asteroids, comets, and other celestial bodies. They are used to gather scientific data, images, and other important information that can help us learn more about the universe.

The unmanned spacecraft is equipped with a variety of instruments and sensors that allow it to study the object it is exploring. These instruments can include cameras, spectrometers, radar systems, and other scientific instruments. The spacecraft is controlled remotely from Earth, and the data it collects is transmitted back to Earth for analysis.

One of the main advantages of using unmanned spacecraft is that they can operate in environments that are too dangerous or inhospitable for humans. For example, unmanned spacecraft can explore the harsh and extreme environments of other planets or moons, where humans cannot survive.

Additionally, unmanned spacecraft are often less expensive to launch and operate than crewed missions, making them a more cost-effective option for space exploration.

In summary, unmanned spacecraft are an essential tool for exploring the vast expanse of space. They allow us to gather important data and information about our universe, and they are a key component of modern space exploration.

To know more about spacecraft, visit:

https://brainly.com/question/13478702#

#SPJ11

(i) The number of moles per litre of excess hydrochloric acid that reacted with sodium hydroxide, NaOH, is 0.2.

(ii) The number of moles per litre of acid that reacted with the carbonate is 0.04.

(iii) The number of moles of carbonate, MCO, that reacted with the acid is 0.008.

(iv) The formula mass of the carbonate, MCO, is the sum of the atomic masses of the carbon, oxygen and metal atoms, i.e., MCO, M + 12 + 16 = M + 28.

(v) The atomic mass of the metal M can be determined by subtracting 28 from the formula mass of the carbonate. Thus, M = formula mass of MCO - 28.

In summary, the given information is used to calculate the number of moles per litre of excess hydrochloric acid, the number of moles per litre of acid that reacted with the carbonate, the number of moles of carbonate that reacted with the acid, the formula mass of the carbonate and the atomic mass of the metal.

Know more about  Hydrochloric acid here

https://brainly.com/question/15231576#

#SPJ11

The mass of aluminum metal produced when 15.0 mL of a 0.300 M aluminum phosphate solution reacts with 180 mg of magnesium metal is 15.60 mg.


1. First, find moles of aluminum phosphate using its concentration and volume: moles = M x V = 0.300 mol/L x 0.015 L = 0.0045 mol.

2. Next, convert the mass of magnesium metal to moles using its molar mass: moles = mass / molar mass = 180 mg / (24.31 g/mol x 1000 mg/g) = 0.00741 mol.

3. Now, find the limiting reactant by comparing the mole ratios: (0.0045 mol AlPO₄) / (2) < (0.00741 mol Mg) / (3), so aluminum phosphate is the limiting reactant.

4. Calculate the moles of aluminum produced using the mole ratio: moles of Al = 2 x 0.0045 mol AlPO₄ = 0.009 mol.

5. Finally, convert the moles of aluminum to mass: mass = moles x molar mass = 0.009 mol x 26.98 g/mol x 1000 mg/g = 15.60 mg.

To know more about limiting reactant click on below link:

https://brainly.com/question/14225536#

#SPJ11

The pH of a 0.25 molar HBz (benzoic acid) solution is approximately 2.61.

To calculate the pH of the solution, follow these steps:

1. Write the dissociation equation for benzoic acid: HBz ⇌ H⁺ + Bz⁻.
2. Set up an ICE table (Initial, Change, Equilibrium) to determine the equilibrium concentrations of the species involved.
3. Write the expression for Ka: Ka = [H⁺][Bz⁻]/[HBz].
4. Substitute the equilibrium concentrations into the Ka expression and solve for x, representing the [H⁺] concentration.
5. Calculate the pH using the formula: pH = -log[H⁺].

Initial concentrations are [HBz] = 0.25 M, [H⁺] = 0 M, and [Bz⁻] = 0 M. The change in concentration is -x for HBz, +x for H⁺, and +x for Bz⁻. Thus, at equilibrium, [HBz] = 0.25 - x, [H⁺] = x, and [Bz⁻] = x. The Ka expression becomes (6.5 × 10⁻⁵) = x²/(0.25 - x). After solving for x, we find x ≈ 0.00256 M. Finally, pH = -log(0.00256) ≈ 2.61.

To know more about ICE table click on below link:

https://brainly.com/question/30395953#

#SPJ11

The standard potential for this cell at 25°C is +0.77 V.

We can use the standard reduction potentials to calculate the standard cell potential, which is given by:

E°cell = E°reduction (cathode) - E°reduction (anode)

The reduction half-reactions for nickel and copper ions are:

E°red = -0.25 V for Ni2+(aq) + 2e- Ni(s).

Cu+(aq) + e- → Cu(s) E°red = +0.52 V

Note that we have to use the reduction potential for copper(I) ions, as that is the form in which copper is present in the cell.

When we enter the values into the formula, we obtain:

E°cell = +0.52 V - (-0.25 V)

E°cell = +0.77 V

Therefore, the standard potential for this cell at 25°C is +0.77 V.

To learn more about Potential :

brainly.com/question/27393410

#SPJ4

1. Moles of CO₂ is 0.8047.

2. Moles of C is 1.6094.

3. C:H ratio is 1:3.

4. The Emperial formula is c6H6.

5. Emperical formula mass is 78g/mol.

1. Moles of CO₂ = 24.41 g / 44.01 g/mol = 0.5548 mol; Moles of H₂O = 14.49 g / 18.02 g/mol = 0.8047 mol

2. Moles of C = 0.5548 mol (1 C atom in CO₂); Moles of H = 0.8047 mol * 2 (2 H atoms in H₂O) = 1.6094 mol

3. C:H ratio = 0.5548:1.6094 ≈ 1:3 (divide by smallest value), but 1:2.89 is closer, which gives a ratio of 6:6 (multiply by 3 to get whole numbers)

4. Empirical formula: C₆H₆

5. Empirical formula mass: (6 * 12.01) + (6 * 1.01) = 78 g/mol. Molecular formula: (246 g/mol) / (78 g/mol) = 3; C₆H₆ * 3 = C₁₂H₁₂ (molecular formula)

To know more about Molecular formula click on below link:

https://brainly.com/question/14425592#

#SPJ11

(a) Osmolarity of 0.069 m na2co3 is 0.138 m, (b) osmolarity of 0.62 m ai(no3)3 is 1.86 m, (c) osmolarity of a 0.30 m glucose (c6h1206) aqueous solution is 0.30 m.

Osmolarity is a measure of the concentration of solutes in a solution. It is expressed as the number of osmoles (molecules or particles) of solutes per litre of solution. Osmolarity is an important factor in the body's ability to regulate the balance of water and electrolytes in the blood and other bodily fluids. It is also important for the absorption of nutrients from the intestines, and the maintenance of blood pressure. Osmolarity is measured using a special instrument called an osmometer.

To learn more about Osmolarity

https://brainly.com/question/14814464

#SPJ4

The number of moles in a cylinder of Krypton can be calculated using the Ideal Gas Law, which states that the product of pressure, volume, and temperature divided by the gas constant should be equal to the number of moles of gas in the container.

Using the given values, we find that the number of moles in the cylinder is 1.61 moles. To calculate this, first convert the temperature to Kelvin (K) by adding 273.15 to the temperature in Celsius, giving us 385.95 K.

Then, the ideal gas law equation becomes (22.8 atm * 17 L) / (8.314 J/K*mol * 385.95 K) = 1.61 moles. Thus, the cylinder contains 1.61 moles of Ar.

Know more about Ideal gas law here

https://brainly.com/question/28257995#

#SPJ11

The alpha decay of the isotope of the element produces lead-206 is the polonium (Po)- 210.

Alpha decay is the process, the alpha particles is the emitted when the heavier nuclei decays into the lighter nuclei. Then the  alpha particle released has the charge of the +2 units.

The representation of the alpha decay is as :

[tex]X^{A}{z} }[/tex] --->  Y⁴₂  +  α⁴₂

Y⁴₂  = Pb²⁰⁶₈₂

Z - 2 = 82

Z = 84

A - 4 = 206

A = 210

The atomic mass, A = 210

The atomic number, Z = 84

Therefore, the element is the polonium (Po) that has the atomic number is the 84 and the atomic mass is the 210.

To learn more about isotopes here

https://brainly.com/question/787643

#SPJ4

The work done by Henry can be calculated by multiplying the weight of the box (500 N) with the distance it was lifted (0.75 m). Thus, the work done is 375 J (Joules).(D)

In physics, work is defined as the energy transferred when a force is applied to move an object through a distance. The unit of work is Joule, which is the same as Newton-meter. In this question, Henry lifted the box with a force equal to its weight, and the box was lifted through a distance of 0.75 m.

Therefore, Henry did work on the box by transferring 375 J of energy to it. This work is equal to the potential energy gained by the box due to its vertical displacement. The time taken (1.5 seconds) is not relevant to the calculation of work.

To know more about potential energy click on below link:

https://brainly.com/question/24284560#

#SPJ11

A mixture of 24.59 g zinc and sodium was reacted with H₂SO₄ and then with BaCl₂ to form BaSO₄. The percentage of sodium by mass in the mixture was found to be 16.97%.

The first step is to determine the amount of barium sulfate formed in the reaction. From the reaction equation, we can see that 1 mole of barium sulfate is produced for every mole of zinc in the mixture. Therefore, the amount of barium sulfate formed is:

24.59 g Zn x (1 mol Zn / 65.38 g Zn) x (1 mol BaSO₄ / 1 mol Zn) x (233.39 g BaSO₄ / 1 mol BaSO₄) = 8.80 g BaSO₄

Next, we need to calculate the amount of sodium in the original mixture. We can do this by subtracting the mass of zinc from the total mass of the mixture:

Mixture mass - Zinc mass = Sodium mass

24.59 g - (24.59 g x %Zn) = Sodium mass

We don't know the percent zinc by mass, but we can find it using the mass of barium sulfate formed. The mass percent of sodium in the mixture is then:

%Na = (Sodium mass / Mixture mass) x 100

To find the percent zinc by mass, we can subtract the percent sodium by mass from 100:

%Zn = 100 - %Na

Finally, we can substitute the values we found into the equations and solve for %Na:

8.80 g BaSO₄ x (1 mol BaSO₄ / 233.39 g BaSO₄) x (1 mol Na₂SO₄ / 1 mol BaSO₄) x (142.04 g Na₂SO₄ / 1 mol Na₂SO₄) = 4.04 g Na₂SO₄

Mixture mass - Zinc mass = Sodium mass

24.59 g - (24.59 g x %Zn) = Sodium mass

%Na = (Sodium mass / Mixture mass) x 100

Substituting the values we found:

%Na = (4.04 g / 24.59 g) x 100 = 16.4%

Therefore, the percent sodium by mass in the original mixture is 16.4%.

To know more about the percentage of sodium refer here :

https://brainly.com/question/13777347#

#SPJ11

The initial volume is 15.36 L when the pressure changes from 101.3 kPₐ to 1.92 atm, and the final volume is 8.0 L, assuming constant temperature and number of moles.

To find the initial volume in liters when the pressure changes from 101.3 kPₐ to 1.92 atm, and the final volume is 8.0 L. We will assume constant temperature and number of moles.

Step 1: Convert the initial pressure to atm.
1 atm = 101.325 kPₐ, so:
(101.3 kPₐ) × (1 atm / 101.325 kPₐ) = 1.000 atm (approximately)

Step 2: Apply Boyle's Law, which states that P₁×V₁ = P₂×V₂ when temperature and moles are constant.
P₁ = 1.000 atm
P₂ = 1.92 atm
V₂ = 8.0 L

Step 3: Solve for the initial volume, V₁.
1.000 atm × V₁ = 1.92 atm × 8.0 L
V₁ = (1.92 atm * 8.0 L) / 1.000 atm
V₁ = 15.36 L

The initial volume is 15.36 L when the pressure changes from 101.3kPₐ to 1.92 atm, and the final volume is 8.0 L, assuming constant temperature and number of moles.

To know more about Boyle's Law :

https://brainly.com/question/1437490

#SPJ11

The amount of energy required to boil water depends on the initial temperature of the water, the mass of the water, and the heat of vaporization of water.

The heat of vaporization of water is 40.7 kJ/mol or 2.26 kJ/g.

To completely boil 500g of water that is at 15°C, we need to first heat the water to its boiling point (100°C), and then provide the energy required for the phase change from liquid to gas.

The amount of energy required to heat the water from 15°C to 100°C can be calculated using the specific heat capacity of water, which is 4.184 J/g°C:

Q1 = m * c * ΔT

Q1 = 500g * 4.184 J/g°C * (100°C - 15°C)

Q1 = 191,020 J

The amount of energy required for the phase change from liquid to gas can be calculated as follows:

Q2 = m * Hv

Q2 = 500g * 2.26 kJ/g

Q2 = 1,130 kJ

Therefore, the total amount of energy required to completely boil 500g of water that is at 15°C is:

Qtotal = Q1 + Q2

Qtotal = 191,020 J + 1,130 kJ

Qtotal = 1,321,020 J

So, it would require 1,321,020 joules of energy to completely boil 500g of water that is at 15°C.

To know more about energy refer here

https://brainly.com/question/1932868#

#SPJ11

The reaction is combustion reaction of hydrocarbon.

Combustion reaction of hydrocarbons is a chemical reaction in which a hydrocarbons reacts with oxygen in the air to produce carbon dioxide (CO₂) and water (H₂O).

The general equation for the combustion of a hydrocarbon is:

hydrocarbon + oxygen → carbon dioxide + water + heat energy

The given reaction;

2C₈H₁₈ + 25O₂ -------> 16CO₂ + 18H₂O

So this reaction corresponds to combustion reaction.

Learn more about combustions here: https://brainly.com/question/13251946

#SPJ1