Using the quadratic formula, solve 0 = 2x²8x + 5 Give each of your answers to 2 d.p.​

We can see here that the problem that can be solved using synthetic division is: A. [tex]\frac{2y^{2} + 4y - 6}{y-1}[/tex]

Synthetic division is a simplified method of polynomial division, used to divide a polynomial by a linear factor of the form (x - a). This method can be used to quickly evaluate a polynomial for a particular value of x, or to find the roots of a polynomial equation.

In order to solve with synthetic division, we have:

Step 1: Make the denominator to equal zero. The numerator is written in descending order.

Step 2: Bring the first number or the leading coefficient straight down.

Step 3: Put the result in the next column by multiplying the number in the division box with the number you brought down.

Step 4: Write the result at the bottom of the row by adding the two numbers together

Step 5: Until you reach the end of the problem, repeat steps 3 and 4.

Learn more about synthetic division on https://brainly.com/question/29638766

#SPJ1

The solutions to the equation are approximately x = 0.89 and x = -0.89.

Squares as well as square root both ideas are diametrically opposed to one another. Squares are the numbers that are produced when a value is multiplied by itself. In contrast, a number's square root is a value that, when multiplied by itself, returns the original value. Both are hence vice-versa approaches. For instance, 2 is squared to provide 4, and 2 is the square root of 4, giving 2.

When n is a number, its square is denoted by n raised to the power 2, or n2, and its square root is denoted by the symbol "n," where "n" is referred to as a radical. The term "radicand" refers to the value under the root symbol.

The given equation is 5x² + 2 = 6.

5x² = 4

x² = 4/5

x = ±√(4/5)

x ≈ ±0.89

Hence, the solutions to the equation are approximately x = 0.89 and x = -0.89.

Learn more about square root here:

https://brainly.com/question/1387049

#SPJ1

Take note that Bus 18 is the most reliable in terms of trip times among the line plots shown above. With our understanding of the interquartile range, we can solve this. (IQR)

We must compare the metrics of data variability in order to identify the bus that consistently produces the best accurate results. Range and interquartile range are the metrics of variability that we can utilise in this situation (IQR).

The IQR is the difference between the third quartile (Q3) and the first quartile, whereas the range is the difference between the highest and lowest values in the data set (Q1). Because it is less impacted by extreme values than the range, the IQR provides a more accurate indicator of variability.

Using the given data, we can calculate the range and IQR for each bus:

Bus 47:

Range = 28 - 4 = 24

Q1 = 10, Q3 = 22

IQR = 22 - 10 = 12

Bus 18:

Range = 22 - 6 = 16

Q1 = 9, Q3 = 25

IQR = 25 - 9 = 16

According to these findings, Bus 18 has a narrower range and a higher IQR than Bus 47. The IQR, a more accurate indicator of variability in this situation, reveals that Bus 18's trip times are less variable than those of Bus 47's. Hence, we can say that when it comes to trip times, Bus 18 is the most reliable.

To know more about line plots, visit:

brainly.com/question/16321364

#SPJ1

When two objects are massive and close to each other, the gravitational force between them is strong.

Gravity is a fundamental force of nature that exists between any two objects in the universe. The strength of the gravitational force depends on two factors: the masses of the two objects and the distance between them.

The larger the masses of the two objects, the greater the gravitational force between them. Likewise, the closer the objects are to each other, the stronger the gravitational force.

This relationship is described by Newton's Law of Gravitation, which states that the force of gravity between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between them.

Read more about gravitational force at

https://brainly.com/question/29946109

#SPJ1

Answer:

55

Step-by-step explanation:

Answer:

(8÷2+9)×9−10²

hope this helped!

9 is the centre of enlargement in triangle .

What is a triangle, exactly?

A triangle, a three-sided polygon, is made up of three vertices. When the triangle's three sides are joined end to end at a single point, the angles are created. Three angles in a triangle add up to 180 degrees in total. A triangle is a closed, two-dimensional geometry with three sides, three angles, and three vertices. Triangles are also a type of polygon.

First draw lines from point O through A, B and C, as shown in the diagram

Measure the length O A and multiply it by 1.5 to get the distance from O of the image point A'.

      O A' = 1.5 × O A

       OA' = 1.5 * √(4 - 0)² + (4 - 0)²

              = 1.5*4√2

       OA' = 6

Mark the point A' on the diagram

The images B' and C' can then be marked in a similar way and the enlarged triangle A' B' C' can then be drawn.

OB' = 1.5OB

OB' = 1.5 √(4 - (-2))² + ( 4 -0 )²

OB' = 1.5*2√13

 OB' = 3√13

 OC' = √1.5 * √(4 - (-2))² + 4 - 4

 OC' = 1.5*6

   OC' = 9

Learn more about triangle

brainly.com/question/2773823

#SPJ1

The average rate of increase is $69 per year (to the nearest dollar).

What is average rate of increase?

The  function is defined as the average rate at which one measurement is changing(here increasing) with respect to another change. So an average rate of change function is a system that calculates the amount of change in one data divided by the corresponding amount of change in another.

The fees in 1997( x₁ say) was $3042( y₁ say)

fees in 2000(x₂ say) was $3250 ( y₂ say)

The formula is for change in average rate is  [tex]\frac{ y_{2} -y_{1} }{x_{2} -x_{1} }[/tex]

average rate of increase= (3250-3042)/(2000-1997)

                                        = 208/3

                                         =69.33

so average rate of increase to the nearest dollar  is $69 per year.

To know more about  average rate of increase

https://brainly.com/question/30759234  from the link.

#SPJ1

Answer: $2240.59

Step-by-step explanation:

To calculate the compound interest paid when an amount is borrowed at 5% p.a for 26 years and compounded monthly, you can use the formula:

A = P(1 + r/n)^(nt)

where:

A = the amount of money you will have after t years

P = the principal amount (the amount borrowed)

r = the annual interest rate (as a decimal)

n = the number of times the interest is compounded per year

t = the time (in years) for which the money is borrowed

In this case, we have:

P = the amount borrowed (not given in the question)

r = 5% p.a, or 0.05 as a decimal

n = 12 (since the interest is compounded monthly)

t = 26 years

We need to find the amount of compound interest paid, so we need to find the difference between the amount of money you will have after 26 years (A), and the amount you borrowed (P).

Let's assume the amount borrowed (P) is $1000. Then, we can substitute these values into the formula:

A = 1000(1 + 0.05/12)^(12*26)

A = 1000(1.004167)^312

A = 1000(3.240590)

A = $3240.59

So, after 26 years, the amount of money you will have is $3240.59. The compound interest paid is the difference between the amount borrowed and the final amount:

Compound interest paid = $3240.59 - $1000

Compound interest paid = $2240.59

Therefore, the compound interest paid if the amount is borrowed at 5% p.a for 26 years and compounded monthly is $2240.59.

A = $36,594.00

A = P + I

where

P (principal) = $10,000.00

I (interest) = $26,594.00

First, convert R as a percent to r as a decimal

r = R/100

r = 5/100

r = 0.05 rate per year,

Then solve the equation for A

A = P(1 + r/n)nt

A = 10,000.00(1 + 0.05/12)(12)(26)

A = 10,000.00(1 + 0.0041666666666667)(312)

A = $36,594.00

Summary:

The total amount accrued, principal plus interest, with compound interest on a principal of $10,000.00 at a rate of 5% per year compounded 12 times per year over 26 years is $36,594.00.

The equation "Y^2/9 - x^2/4=1" will produce the given graph. Therefore option B would be the correct answer.

Mathematically, an equation can be defined as a statement that supports the equality of two expressions, which are connected by the equals sign “=”. For example, 2x – 5 = 13.

An equation combines two expressions connected by an equal sign (“=”). These two expressions on either side of the equals sign are called the “left-hand side” and “right-hand side” of the equation. We generally assume the right-hand side of an equation is zero. This will not reduce the generality since we can balance this by subtracting the right-hand side expression from both sides’ expressions.

Visit here to learn more about the equation: https://brainly.com/question/29657983

#SPJ1

Answer: x^2-22x+121

I believe this is correct.

The friends error was in the terms factored out in the second step

It looks like your friend attempted to factor the polynomial using the distributive property of multiplication, but made an error in the second step.

first step 3x^3+x^2+3x+1

second step 3x^2(x+1)+3(x+1)

third step 3(x^2+1)(x+1)

the error is in the terms factored out in the second step: 3x^2 and 3

The correct factorization of the polynomial is:

3x^3 + x^2 + 3x + 1

= x^2(3x + 1) + 1(3x + 1)

= (3x^2 + 1)(x + 1)

The term factored out is: x^2 and 1

Learn more about factorization at:

https://brainly.com/question/10718512

#SPJ1

Answer:

Step-by-step explanation:

[tex]3.25x - 1.5y = 1.25 \quad (a)[/tex]  

     [tex]13x - 6y = 10\quad\quad(b)[/tex]

Make [tex]y[/tex] the subject in [tex](b):[/tex]

   [tex]13x - 6y = 10[/tex]

             [tex]6y=13x-10[/tex]

               [tex]y=\frac{13}{6} x-\frac{5}{3} \quad(c)[/tex]

Substitute [tex](c)[/tex] into [tex](a):[/tex]

     [tex]3.25x - 1.5(\frac{13}{6} x-\frac{5}{3}) = 1.25 \quad \text{(I will change decimals to fractions)}[/tex]

            [tex]\frac{13x}{4} -\frac{3}{2} (\frac{13x}{6} -\frac{5}{3} )=\frac{5}{4} \quad\quad \text{(I will remove brackets)}[/tex]

                 [tex]\frac{13x}{4} - \frac{13x}{4} +\frac{5}{2} =\frac{5}{4}[/tex]

                                     [tex]\frac{5}{2} =\frac{5}{4}[/tex]

This is ambiguous meaning the system does not have a solution.

(I confirmed this on Wolfram Alpha)

The volume of a cone is given by the formula:

V = (1/3) * pi * r^2 * h

where r is the radius of the base and h is the height of the cone.

Substituting the given values, we get:

V = (1/3) * pi * 9^2 * 23

V = (1/3) * pi * 729 * 23

V = 6,859 pi

Therefore, the volume of the cone is 6,859 pi cubic units.

The quadratic polynomial with the given zeros is:

y = x² - 7/3

If we have a quadratic equation whose zeros are a and b, then we can write it as:

y = (x - a)*(x - b)

in this case the zeros are √7/3 and -√7/3

Then the quadratic equation is:

y = (x - √7/3)*(x +  √7/3)

y = x² - 7/3

That is the quadratic polynomial.

Learn more about quadratic polynomials at:

https://brainly.in/question/55637612

#SPJ1

If the budget were to increase to $3000, allowing us to survey many more people from a simple random sample, the test statistic would likely be more accurate and reliable.

As per the given scenario,

if we have a limited budget of $500, we can only survey 50 people from a simple random sample. In order to study the relationship between social class and voting preferences, the budget must be increased to $3000.

On increasing the budget, we can survey more people from a simple random sample, which would lead to a better representation of the population.
Due to the small budget, the test statistic would be less accurate as only a small number of people are being surveyed. However, if the budget increases to $3000, it would allow for a larger sample size and therefore the test statistic would be more accurate.

This would result in a narrower confidence interval and a higher level of confidence in the accuracy of the results.
Moreover, with a larger budget, it would be possible to use more sophisticated sampling techniques such as stratified random sampling, which could further increase the accuracy of the test statistic.

For similar question on statistic

https://brainly.com/question/15525560

#SPJ11

The statement is False. At a significance level of alpha equal to .05, if your model has a p-value close to 0 for the overall f test, but none of the individual variables in the model have a p-value <0.05, then you do not have an issue with multi-collinearity. Therefore the given statement is false.

A p-value is a measure of the strength of evidence against the null hypothesis. The smaller the p-value, the stronger the evidence against the null hypothesis.

When the p-value is less than or equal to the significance level alpha, then we reject the null hypothesis. In general, when the overall F-test has a low p-value and none of the individual variables in the model have a p-value less than 0.05, it is an indication of multi-collinearity.

Multi-collinearity is a situation in which two or more independent variables in a multiple regression model are highly correlated with each other. It can lead to unstable estimates of the regression coefficients and make it difficult to interpret the results of the model.

In conclusion, at a significance level of alpha equal to .05, if your model has a p-value close to 0 for the overall f test, but none of the individual variables in the model have a p-value <0.05, then you do not have an issue with multi-collinearity. The statement is false.

Know more about p-value here:

https://brainly.com/question/13786078

#SPJ11

Answer:

[tex]y = 6x - 4[/tex]

Step-by-step explanation:

To find the equation of the line that passes through the given points (-1, -10) and (3, 14), first find the slope by inputting the points into the slope formula.

[tex]\boxed{\begin{minipage}{8cm}\underline{Slope Formula}\\\\Slope $(m)=\dfrac{y_2-y_1}{x_2-x_1}$\\\\where $(x_1,y_1)$ and $(x_2,y_2)$ are two points on the line.\\\end{minipage}}[/tex]

Let (x₁, y₁) = (-1, -10)

Let (x₂, y₂) = (3, 14)

Therefore, the slope of the equation is:

[tex]\implies m=\dfrac{14-(-10)}{3-(-1)}=\dfrac{14+10}{3+1}=\dfrac{24}{4}=6[/tex]

Now that we have determined the slope of the line, we can input the found slope and either of the two given points into the point-slope formula to create the equation of the line.

[tex]\boxed{\begin{minipage}{5.8 cm}\underline{Point-slope form of a linear equation}\\\\$y-y_1=m(x-x_1)$\\\\where:\\ \phantom{ww}$\bullet$ $m$ is the slope. \\ \phantom{ww}$\bullet$ $(x_1,y_1)$ is a point on the line.\\\end{minipage}}[/tex]

Substituting m = 6 and (x₁, y₁) = (-1, -10) into the point-slope formula:

[tex]\implies y-(-10)=6(x-(-1))[/tex]

Simplifying:

[tex]\implies y+10=6(x+1)[/tex]

[tex]\implies y+10=6x+6[/tex]

[tex]\implies y=6x-4[/tex]

Therefore, the equation of the line that passes through (-1,-10) and (3,14) is:

[tex]\boxed{y = 6x - 4}[/tex]

Answer:

6x - y - 4 = 0

Step-by-step explanation:

To find:-

Solution:-

We are here given two lines and we are interested in finding out the equation of the line passing through the given points.

Firstly here we will find out the slope of the line as ,

[tex]:\implies \sf m =\dfrac{y_2-y_1}{x_2-x_1}\\[/tex]

Now on substituting the respective values, we have;

[tex]:\implies \sf m =\dfrac{-10-14}{-1-3} \\[/tex]

[tex]:\implies \sf m = \dfrac{-24}{-4}\\[/tex]

[tex]:\implies \sf\pink{ m = 6}\\[/tex]

Now we can use the point slope form of the line to find out the equation of the line . The point slope form of the line is ,

[tex]:\implies \sf \pink{ y - y_1 = m(x_2-x_1)}\\[/tex]

Take any one of the given points for (x₁,y₁) . Here i am taking (3,14) .

Now finally substitute the respective values,

[tex]:\implies \sf y - 14= 6(x -3 )\\[/tex]

[tex]:\implies \sf y- 14= 6x - 18 \\[/tex]

[tex]:\implies \sf 6x - y - 18 + 14 = 0\\[/tex]

[tex]:\implies \sf\pink{ 6x - y -4 = 0 }\\[/tex]

Hence the required equation of the line in standard form is 6x - y - 4 = 0 .

a) Time taken to reach maximum height is 0.5 sec.

b) Highest point is 484 feet

c) Time to hit the water is 6 sec.

A statement proving the equality of two mathematical expressions is known as an equation.

a) h(t) = - 16t² +16t + 480

Differentiation with respect to t, we get,

h(t)' = - 32t + 16

Again differentiation with respect to t, we get,

h(t)" = -32 is less than 0

Then maximum value of height,

h(t)' = 0

- 32t + 16= 0

t = 1/2 = 0.5

Therefor, Time taken to reach maximum height is 0.5 sec.

b) for highest point; Put value of t in equation

h(0.5) = -16(0.5)²+16(0.5)+480 = 484

Highest point is equal to 484 feet

c) 0 =  -16t² + 16t + 480

0 =  -16 ( t² - t - 30 )

( t - 6 ) ( t + 5) = 0

t = 6, t = -5        (negative value is neglect)

Time to hit the water is 6 sec.

To know more about equation, visit:

https://brainly.com/question/2228446

#SPJ1

Red-green color blindness is controlled by an x-linked gene in humans. The allele that causes color blindness is rare and recessive to the allele for normal vision. A man and woman both with normal vision had color-blind fathers. If this man and woman have a child, Therefore, the probability of a child being color-blind is 25%.

Red-green color blindness is an X-linked recessive disorder. This means that the gene for the disorder is found on the X chromosome. Because males have only one X chromosome (inherited from their mother), they will develop color blindness if they inherit the allele from their mother. On the other hand, females need to inherit two copies of the allele, one from each parent, to develop the disorder.A man with normal vision will have the genotype XY, and the woman will have the genotype XX.

Each child of the couple will receive one X chromosome from the mother and one Y chromosome from the father. The probability of the child inheriting the allele for color blindness from its father is 0 because he has no alleles for color blindness.

The probability of the child inheriting the allele for color blindness from its mother is 1/2 because the mother's X chromosome has a 1/2 probability of carrying the allele. Because the mother is a carrier, the probability of the child receiving the allele is 1/2.

for such more question on probability

https://brainly.com/question/24756209

#SPJ11

The probability that more than a fifth (i.e. 6 or more) of the 10 buyers would prefer green is 0.3981.

To conduct a study of the color preferences of new car buyers, a researcher wishes to conduct a research. Suppose that 30% of the population prefers green. If ten buyers are selected at random, what is the probability that more than a fifth of the buyers will prefer green?

The random variable X represents the number of buyers who prefer green. When n = 10 and p = 0.3, this is a binomial probability experiment. P(X > 2) is the probability that more than a fifth of the buyers would prefer green.P(X > 2) = 1 - P(X ≤ 2)P(X > 2) = 1 - [P(X = 0) + P(X = 1) + P(X = 2)]P(X > 2) = 1 - [C(10,0) (0.3)^0 (0.7)^10 + C(10,1) (0.3)^1 (0.7)^9 + C(10,2) (0.3)^2 (0.7)^8]P(X > 2) = 1 - [1(0.7)^10 + 10(0.3)(0.7)^9 + 45(0.3)^2 (0.7)^8]P(X > 2) = 0.2743

Therefore, the probability that more than a fifth of the buyers would prefer green is 0.2743, rounded to four decimal places.

You can read more about probability at https://brainly.com/question/24756209

#SPJ11

When you take a strip of paper, put two half twists in it, and glue the ends together and then cut it lengthwise along the center core line, it results in two interlocked loops.What you get is two interlocked loops when you cut it lengthwise along the center core line. This occurs because the paper strip has been twisted twice. The twist that was made in the paper strip produces two loops that are intertwined after it is cut down the center line.Paper is quite a flexible substance. When it's twisted, it retains its new shape. Because of this, when you twist a strip of paper, it retains its new form. When the strip is bent and connected to form a loop, the twisted part becomes embedded in the paper's core. This produces two loops that are interconnected. When the loop is sliced down the middle, the two loops remain interconnected since the twists in the strip have become embedded in the core.

Answer:

h(x) = (x^2 - 64)

Step-by-step explanation:

If the solutions to h of x = 0 are x = -8 and 8, then h(x) must be a quadratic function with roots at x = -8 and x = 8.

One way to write the quadratic function that satisfies these conditions is:

h(x) = (x+8)(x-8)

where a is some non-zero constant that determines the shape of the parabola.

Expanding the above equation, we get:

h(x) = (x^2 - 64)

Therefore, one possible quadratic function that could represent h is:

h(x) = (x^2 - 64)

where a is any non-zero constant.

The radius of the sphere when the volume and the radius are increasing at the same numerical rate is √(1/2π) cm.

The numerical rate of increase in the volume of a sphere with respect to the increase in the radius is given by numerical rate,

dn/dt=4πr² * dr/dt.

Here, dn/dt is the rate of increase of volume with time, dr/dt is the rate of increase of radius with time, and r is the radius of the sphere.

The rate of increase of radius is given as dr/dt=18 cm/s. We need to find the radius of the sphere when the volume and the radius are increasing at the same numerical rate.

Let dn/dt=18 cm³/s, which means the volume and radius are increasing at the same numerical rate. Then

18=4πr² * 18So, r²=1/2π => r = √(1/2π) cm

Therefore, In a sphere whose volume and radius increase at the same numerical rate, the radius is √(1/2π) cm.

To know more about sphere: https://brainly.com/question/20394302

#SPJ11

The interquartile range (IQR) of the given data set is 16.

To find the interquartile range (IQR), we first need to calculate the first and third quartiles of the data set:

Arrange the data set in order from smallest to largest:

22, 26, 28, 30, 32, 35, 35, 42, 45, 49, 50

Find the median (middle value) of the lower half of the data set (the first quartile, Q1):

22, 26, 28, 30, 32, 35

The median of this set is 29, which is halfway between 28 and 30.

Find the median (middle value) of the upper half of the data set (the third quartile, Q3):

35, 42, 45, 49, 50

The median of this set is 45.

Calculate the IQR by subtracting Q1 from Q3:

IQR = Q3 - Q1

   = 45 - 29

   = 16

To learn more about interquartile range here:

https://brainly.com/question/31190938

#SPJ1

The minimum value of the function g(x) = (x-3)² occurs at the vertex of the parabola, which is located at x = 3. At this point, the value of the function is g(3) = (3-3)² = 0.

To see why this is the case, we can use the fact that the vertex of a parabola in the form f(x) = a(x-h)² + k is located at (h,k). In the case of g(x) = (x-3)², we have a = 1, h = 3, and k = 0, so the vertex is located at (3,0).

Since the parabola opens upwards (the coefficient a is positive), the value of the function is minimized at the vertex.

Therefore, the minimum value of g(x) is 0, which occurs at x = 3.

Learn more about functions on;

https://brainly.com/question/10439235

#SPJ1

Ball A reaches a greater height than Ball B.

To determine which ball reaches a greater height, we need to compare the maximum height each ball reaches.

For Ball A, we can use the formula for the vertex of a parabola, which is given by [tex]x = - \frac{b}{2a} [/tex], where a and b are the coefficients of the quadratic equation in standard form (ax² + bx + c = 0). In this case, a = -4.9 and b = 14.7, so the vertex of Ball A's path is at [tex]x = \frac{ - 14.7}{2 \times 4.9} = 1.5 [/tex] seconds.

To find the maximum height of Ball A, we can plug this value into the original equation:

[tex]f(1.5) = -4.9 \times {1.5}^{2} + 14.7(1.5) + 0.975 = 9.9 \: \: meters.[/tex]

For Ball B, we can look at the table and see that it reaches a maximum height of 8 meters.

Therefore, Ball A reaches a greater height than Ball B by 1.9 meters (9.9 - 8 = 1.9)

We can answer this question without graphing either function by using the properties of quadratic functions. The maximum height of a quadratic function occurs at the vertex, which can be found using the formula x = -b/2a. We can then plug this value into the function to find the maximum height. By comparing the maximum heights of the two balls, we can determine which ball reaches a greater height.

Function related one more question:

https://brainly.com/question/22340031

#SPJ1

A chi-squared statistic provides strong evidence in favor of the alternative hypothesis if its value is A.  a large positive number.

Chi-squared statistics or chi-squared test is a statistical method used to find out if there is a significant difference between the expected and observed frequencies in one or more categories of a contingency table. This test is used to determine whether the null hypothesis can be rejected or not. Chi-squared statistics are a non-parametric test that helps to determine whether the data is close to what is expected or not. This test is used when the data is ordinal or nominal.

Chisquare test is often used for: Testing if the observed frequencies of a nominal variable are significantly different from the expected frequencies Assessing if two or more distributions are the same. The chi-squared statistic provides evidence for or against the null hypothesis. A large positive value of the chi-squared statistic indicates that the null hypothesis can be rejected.

Therefore, option A. a large positive number, is the correct answer.

Learn more about  interpretation of the chi-square statistic:https://brainly.com/question/30969934

#SPJ11

First five terms of the sequence are 4, 5, 9, 14, and 23.

For the given sequence an = an-1 + an-2, with a1 = 4 and a2 = 5:

1. Its first term is a1 = 4.
2. Its second term is a2 = 5.
3. To find the third term, use the formula: a3 = a2 + a1 = 5 + 4 = 9.
4. For the fourth term, apply the formula again: a4 = a3 + a2 = 9 + 5 = 14.
5. Finally, for the fifth term: a5 = a4 + a3 = 14 + 9 = 23.

So, the first five terms of the sequence are 4, 5, 9, 14, and 23.

Learn more about sequence.

brainly.com/question/30262438

#SPJ11

Answer:

Step-by-step explanation: