Answer:
Dating Of The Earth
Explanation:
Dating of the earth is not an evidence of evolution. While it provides important context for understanding the timescale over which evolution has occurred, it is not itself a direct observation of the processes of evolution. The other options listed - comparative embryology, molecular comparisons, fossils, comparative anatomy, and vestigial structures - all provide evidence for evolution by revealing similarities and differences between species that are best explained by common ancestry and divergent evolution over time.
Which best describes the pattern seen between planet diameter and density?
If planets have a high density, they tend to have a smaller diameter.
If planets have a high density, then tend to have
a larger diameter.
There is no pattern between planet density and diameter.
NAVEDO
D
The relationship between a planet's diameter and density is not consistent or easily defined. Generally speaking, planets with a high density tend to have a smaller diameter, while planets with a lower density tend to have a larger diameter.
Here, correct option is A.
This trend is largely due to the fact that high-density planets are typically composed of heavier materials, such as iron, nickel and rock, which provide less volume than lighter materials, such as hydrogen and helium. However, there are exceptions to this rule, such as the small, icy dwarf planets in the outer Solar System, which have a relatively low density and a large diameter.
Ultimately, the size and density of a planet is determined by the composition of the material that makes it up and the amount of gravity the planet is subjected to. As such, there is no one-size-fits-all pattern between planet diameter and density.
Therefore, correct option is A.
Know more about planet's diameter here
https://brainly.com/question/16357823#
#SPJ11
Complete question is :
Which best describes the pattern seen between planet diameter and density?
A. If planets have a high density, they tend to have a smaller diameter.
B. If planets have a high density, then tend to have a larger diameter.
C. There is no pattern between planet density and diameter.
D. NAVEDOD
When you exhale air flows through respiratory structures in which sequence?.
When you exhale, air flows through respiratory structures in the following sequence: bronchioles, bronchi, trachea, pharynx, and out through the nostrils or mouth.
During exhalation, the diaphragm and intercostal muscles relax, causing a decrease in the volume of the thoracic cavity. As a result, air is pushed out of the lungs and flows through the bronchioles, which are small air passages in the lungs, and then into the larger bronchi and trachea, which are the main airways leading to the pharynx, where the air is finally expelled out of the body through the nostrils or mouth.
This sequence of respiratory structures allows for the efficient exchange of gases in the lungs, allowing oxygen to be taken up by the body and carbon dioxide to be released.
To know more about the respiratory structures refer here :
https://brainly.com/question/30024371#
#SPJ11
If all humans share 95. 5% or more of their dna, how can a dna fingerprint differentiate between 2 people?
A DNA fingerprint uses specific regions of the DNA that vary between individuals, such as short tandem repeats (STRs), to differentiate between two people.
DNA fingerprinting, also known as DNA profiling, is a technique that analyzes specific regions of an individual's DNA to create a unique profile. Although humans share a high percentage of DNA with one another, there are still differences in the genetic sequences within certain regions of the genome. These differences, known as polymorphisms, are the basis for DNA fingerprinting. By analyzing these polymorphisms, forensic scientists can differentiate between individuals and exclude others who do not share the same DNA profile.
There are several types of polymorphisms that can be used in DNA fingerprinting, including short tandem repeats (STRs) and single nucleotide polymorphisms (SNPs). STRs are repeating sequences of DNA that vary in length between individuals. SNP's are single nucleotide variations in the genetic code that can be used to identify specific genetic markers. The combination of these polymorphisms provides a unique genetic profile for each individual, which can be used for identification purposes.
Overall, DNA fingerprinting is a highly accurate method for identifying individuals, as the probability of two unrelated individuals sharing the same DNA profile is extremely low. Despite the high percentage of shared DNA among humans, the small differences in genetic sequence are enough to create a distinct genetic profile for each individual.
To know more about fingerprint click here:
https://brainly.com/question/15221897
#SPJ11
why do waterlogging cause death to plants
Waterlogging limits oxygen supply to the roots and prevents carbon dioxide from diffusing away. Root function is reduced or stops and the roots start to die off, allowing the invasion of rots and decay organisms.
Waterlogging limits oxygen supply to the roots and prevents carbon dioxide from diffusing away. Root function is reduced or stops and the roots start to die off, allowing the invasion of rots and decay organisms.
The reading assignment for this week introduced you to the four types of biological macromolecule.
For each category of macromolecule, carbohydrate, lipid, protein and nucleic acid, select a representative polymer and explain its function within the cell. Suggest which aspects of your chosen molecule are characteristic of the class of macromolecules to which it belongs by identifying its monomer subunits and describing their basic chemical structure and the manner in which the monomers are linked together.
For instance, an example of a carbohydrate would be cellulose. Its monomer subunit is glucose which is a monosaccharide with the formula C6H12O6. The glucose molecules in cellulose are linked together by β1-4 glycosidic bonds which form long chains and give cellulose its strength and rigidity. This strength is important as the function of cellulose is to provide structural support in plants
Carbohydrates are one of the four types of biological macromolecules, and one of their representative polymers is glycogen. Glycogen is a large, branched polymer made up of glucose monomers linked together by α1-4 glycosidic bonds and α1-6 glycosidic bonds.
Glycogen is primarily found in animal cells and serves as a storage molecule for glucose, providing a readily available source of energy for the cell. The branching structure of glycogen allows for quick and efficient access to glucose when it is needed by the cell.
Lipids are another type of macromolecule, and one representative polymer is triglycerides. Triglycerides are made up of three fatty acid molecules linked to a glycerol molecule by ester bonds. The fatty acid molecules vary in length and degree of saturation, giving triglycerides a wide range of physical properties. Triglycerides serve as a storage molecule for energy and are found in adipose tissue. They also serve as a structural component of cell membranes and play a role in cell signaling.
Proteins are a third type of macromolecule, and one representative polymer is hemoglobin. Hemoglobin is a complex protein made up of four subunits, each of which contains a heme group. Hemoglobin is responsible for transporting oxygen from the lungs to the tissues and carbon dioxide from the tissues to the lungs. The subunits of hemoglobin are linked together by various types of chemical bonds, including hydrogen bonds, disulfide bonds, and hydrophobic interactions.
Nucleic acids are the final type of macromolecule, and one representative polymer is DNA. DNA is made up of nucleotides, which consist of a nitrogenous base, a sugar molecule, and a phosphate group. The nitrogenous bases are adenine, thymine, guanine, and cytosine, and they are linked together by hydrogen bonds to form the rungs of the DNA ladder. The sugar molecules and phosphate groups make up the sides of the ladder, linked together by phosphodiester bonds. DNA serves as the genetic material of the cell, carrying the instructions for the synthesis of proteins and other molecules necessary for cell function.
Overall, the monomer subunits and manner of linkage of each representative polymer are characteristic of the class of macromolecules to which it belongs. Carbohydrates are made up of monosaccharides linked by glycosidic bonds, lipids are made up of fatty acids linked to a glycerol molecule by ester bonds, proteins are made up of amino acids linked by peptide bonds, and nucleic acids are made up of nucleotides linked by phosphodiester bonds. These characteristics allow each class of macromolecules to perform their unique functions within the cell.
To know more about Carbohydrates click here:
https://brainly.com/question/14614055
#SPJ11
a log with a few lizards drifted onto an island in a storm, and led to a new population of that lizard species there. after a few generations, what would most likely describe the population of lizards on the island?
After a few generations, the population of lizards on the island would likely have adapted to the unique environmental conditions of the island.
The process of adaptation to the new population of lizards on the island would likely be influenced by various factors, such as the availability of food, water, and shelter, as well as the presence of predators and competitors.
The lizards that are better suited to these conditions will have higher survival rates and greater chances of reproducing, passing on their advantageous traits to their offspring. Over time, the population may also undergo genetic drift, which refers to random changes in the genetic makeup of a population due to chance events, such as mutations or fluctuations in population size.
To learn more about population follow the link:
https://brainly.com/question/27991860
#SPJ4
Tell me in 4-5 sentences: Where does the hydrogen that's in a carrot that I just ate come from, what does it help produce after I eat it, and what are the steps along the way? (need answer asap !)
The hydrogen in a carrot you just ate originates from water absorbed by the plant through its roots during the process of photosynthesis.
Once consumed, the hydrogen is used by your body to produce various compounds, including glucose, which is then converted into energy via cellular respiration.
The main steps along the way involve digestion, where the carrot is broken down into its constituent molecules, and metabolism, where these molecules are utilized by cells for various functions.
Once broken down, the glucose is absorbed into your bloodstream and transported to cells throughout your body. Inside the cells, glucose undergoes a series of metabolic reactions through a process called cellular respiration.
During cellular respiration, glucose is oxidized to release energy that is captured in the form of adenosine triphosphate (ATP), which is the primary energy currency of cells.
Hydrogen atoms derived from glucose participate in various stages of cellular respiration. In the initial steps of glycolysis, glucose is converted into pyruvate, generating small amounts of ATP and hydrogen ions in the process.
Later, in the citric acid cycle (also known as the Krebs cycle), the remaining carbons from glucose are further oxidized, leading to the release of additional hydrogen ions and the production of more ATP.
Overall, the hydrogen from the carrot plays a crucial role in supporting your body's energy production and cellular processes.
To learn more about glucose, refer below:
https://brainly.com/question/30548064
#SPJ11
The next condition is there must be a difference in fitness. The different traits must help the individuals survive and reproduce. How did the different trait help the one cactus survive and reproduce?
The different trait in the cactus that helped it survive and reproduce is likely related to its ability to store water in its thick stem and spines, which allow it to adapt to arid environments and outcompete other plants for resources. This trait would have provided a fitness advantage for the cactus, enabling it to survive and reproduce in a harsh environment.
The concept of survival of the fittest is one of the fundamental principles of evolution. For a trait to evolve, there must be a difference in fitness, and it must help individuals to survive and reproduce. In the case of the cactus, its different trait may be its ability to store water in its thick, fleshy stems and leaves. This adaptation allows it to survive in the arid desert environment where water is scarce.
The cactus can go long periods without water, and when it does rain, it can quickly absorb and store water, giving it a competitive advantage over other plants that may not have this ability. This trait enables the cactus to reproduce by producing flowers and fruits that can be pollinated by animals, thus ensuring the survival of its species.
The different trait of water storage in the cactus shows how evolutionary adaptations can help organisms to survive and reproduce in their environment, ensuring the continuity of their species over time.
To know more about survive click here:
https://brainly.com/question/26098341
#SPJ11
Consider the location where the patient felt tenderness. What structure in the right upper quadrant do you think is responsible for the patients symptoms?.
It is possible that the liver is the cause of the patient's tenderness symptoms based on their complaints of pain in the right upper quadrant of their abdomen.
The liver, gallbladder, right kidney, and upper portion of the small intestine are all located in the right upper quadrant of the abdomen. Numerous conditions that affect these structures, such as liver disease, gallstones, kidney stones, or small intestine inflammation, can result in tenderness in this area.
It is challenging to pinpoint the precise source of a patient's symptoms without further details about their symptoms and medical history. For additional assessment and therapy, it is crucial that the patient see a doctor.
Learn more about tenderness Visit: brainly.com/question/30396434
#SPJ4
How could the rabbit look different?
The rabbit could look different in many ways, such as changes in its fur color, ear length, body size, and tail shape; the rabbit's physical appearance can be altered through genetic engineering, which could result in new features like bioluminescent fur or unusual eye colors.
A change in fur color could create rabbits with unique patterns or a completely different hue, such as blue or purple. Altering the length of their ears could lead to breeds resembling the lop-eared rabbits with floppy ears or tall rabbits with erect ears.
Modifying their body size could result in mini rabbits or giant rabbits, while changing their tail shape could lead to rabbits with shorter, bushier tails or longer, streamlined tails. Moreover, genetic engineering could enable the creation of rabbits with unique traits such as larger or smaller eyes, extra appendages, or adaptations for different environments.
To learn more about genetic follow the link:
brainly.com/question/13049663
#SPJ1
B) Why would a fast-growing weed more quickly evolve a resistance to toxic chemicals than a slow- growing tree? (3 points)
A fast-growing weed will evolve a resistance to toxic chemicals more quickly than a slow-growing tree because of the differences in their respective lifespans.
The shorter life span of a weed means that it undergoes more generations over a given period of time than a tree. This allows it to accumulate more genetic mutations, some of which may be beneficial in allowing it to survive in a toxic environment.
With each generation, the beneficial mutations are passed down to the next generation and are more likely to become more entrenched in the population of the weed. In addition, since weeds reproduce rapidly, any resistance that is acquired can spread quickly in the population, allowing it to outcompete other species and survive in a toxic environment.
Know more about toxic chemicals here
https://brainly.com/question/21891087#
#SPJ11
To be complete and accurate, a model of how the material is cycled on the earth would need to include all of the following EXCEPT–
A. Radiation from the sun.
B. Heat from the earth’s interior.
C. Movement of air, water, and rock.
D. Position and motion of the earth
The model of how the material is cycled on the earth would need all of the following: Radiation from the sun, heat from the earth's interior, movement of air, water, and rock, and the position and motion of the earth. There is no exception. Hence, none of the options are exceptions.
The cycling of material on earth involves the transfer and transformation of matter and energy through various processes such as the water cycle, rock cycle, and carbon cycle. Radiation from the sun provides the energy needed to drive these cycles, while heat from the earth's interior helps to power geologic processes such as plate tectonics.
The movement of air, water, and rock is crucial in moving matter from one location to another and facilitating the transformation of material through various physical and chemical processes.
Finally, the position and motion of the earth determine the distribution of solar radiation and affect climate patterns and the behavior of ocean currents.
All of these factors are integral in understanding the complex system of material cycling on earth and must be considered in any comprehensive model of the earth system. Therefore, none of the given options are exceptions.
To know more about cycling of material, refer here:
https://brainly.com/question/29492122#
#SPJ11
Read the following statements and choose the statement that is incorrect with regard to photosynthesis 1
1) Photosynthesis occurs in all unicellular and multicellular organisms.
2) It is a reductive process
3) Carbon Dioxide is evolved as a byproduct in all the organisms capable of photosynthesizing
4) Dark reaction occurs in the stroma of the chloroplast
Codes
"it is a reductive process"
Explanation:
both oxidation and reduction take place in photosynthesis so we cannot classify it as just reductive.
in photosynthesis the water is oxidised while co2 is reduced. this basically transforms co2 into glucose and water into oxygen
hope this helps
Choose all answers that apply
In four o'clock, red petals show incomplete dominance over white petals. If a pink flower is cross with a red flower, ____
If two pink four o'clock flowers are crossed, the ratio of pink to red flowers will be 1:2:1 (25% pink, 50% red, and 25% white), and all of the pink flowers will be heterozygous for the trait of petal color.
In incomplete dominance, the heterozygous individuals show an intermediate phenotype between the homozygous dominant and homozygous recessive individuals.
In this case, the pink flowers are heterozygous for the alleles that control petal color, with one allele for red and one allele for white. When two pink flowers are crossed, the possible genotypes of the offspring are homozygous red, heterozygous pink, and homozygous white, in a 1:2:1 ratio.
However, since incomplete dominance occurs, the heterozygous pink flowers will have an intermediate phenotype between the homozygous red and white flowers.
The complete question is:
In four o'clock flowers, red petals show incomplete dominance over white petals. If two pink flowers are crossed, _____.
the ratio of pink to red flowers will be 2:1
25 percent of the flowers will be white
50 percent of the flowers will be homozygous
25 percent of the flowers will be heterozygous
one-fourth of the flowers will be hybrids
To know more about incomplete dominance, refer here:
https://brainly.com/question/14053639#
#SPJ11
Answer: a more CLEAR ANSWER it’s 50 percent of the flowers will be homozygous, 25 percent of the flowers will be white, and the ratio of pink to red flowers will be 2:1
Explanation:have good day y’all and maybe if other people had more clear answers I wouldn’t have gotten this answer incorrectly
You are a science student completing an outline to guide you in conducting an experiment. You create a main topic
called Equipment. You create subtopics for this main topic named Bottles, Scale, and Safety Glasses. Which outline step
are you performing?
labeling
ordering
O brainstorming
o organizing
The outline step you are performing is organizing. Therefore, option (D) is correct.
The outline step being performed in this scenario is organizing. Organizing involves structuring and arranging the subtopics in a logical order within the main topic. In this case, the main topic is "Equipment," and the subtopics are "Bottles," "Scale," and "Safety Glasses."
By creating these subtopics, the science student is organizing the different components of the equipment they will be using for their experiment. This step helps to provide a clear and organized framework for the experiment, allowing the student to easily identify and address each aspect of the equipment they will need to consider and discuss.
Learn more about organizing, here:
https://brainly.com/question/4891892
#SPJ12
1. Which of the following can intersect outside a triangle?
A angle bisectors
C altitudes
B medians
D sides
T
Angle bisectors, altitudes, medians, and sides All the options are correct for intersect outside a triangle.
Intersecting lines outside a triangle can happen in several ways. Angle bisectors are lines that bisect an angle of a triangle, meaning they cut the angle in half. Altitudes are the lines perpendicular to the sides of the triangle that meet at the triangle's vertex.
Medians are lines that bisect the sides of the triangle and meet at the midpoint of the opposite side. Lastly, sides of a triangle can intersect outside the triangle when extended. This happens when the triangle is obtuse, meaning one of the angles is greater than 90°.
Since the sum of the three angles in a triangle must equal 180°, an angle greater than 90° must be present if a side is extended beyond the triangle. All of these lines can intersect outside the triangle, and can be used to create different types of shapes and figures.
All the options are correct.
Know more about Altitudes here
https://brainly.com/question/4390102#
#SPJ11
there are species of lizards that burrow underground. gophers and moles are
mammals that also burrow underground.
which type of spectation is this
The term that describes mammals that also burrow underground is "fossorial." Fossorial animals are adapted to living underground and have special features such as powerful digging claws, streamlined bodies, and reduced eyesight.
Some common examples of fossorial mammals include moles, gophers, and groundhogs. These animals burrow underground for a variety of reasons such as avoiding predators, regulating body temperature, and finding food.
Fossorial animals play an important role in their ecosystems by aerating soil, controlling pest populations, and serving as prey for larger animals. In general, the ability to burrow underground is an important adaptation for many mammals, allowing them to survive and thrive in a variety of environments.
To know more about mammals click here:
https://brainly.com/question/30075321
#SPJ11
To measure a population’s baseline genetic state, it must have _____________ to be in Hardy-Weinberg equilibrium.
random mating
gene flow
selection
mutations
Answer: A
Explanation:
To measure a population’s baseline genetic state, it must have random mating to be in Hardy-Weinberg equilibrium (Option A).
The Hardy-Weinberg principle state that the genetic variation in a population will remain constant across generations in the absence of different evolutionary forces.
The Hardy-Weinberg assumptions include random mating, no mutation, no gene flow, infinite population size, and absence of selection.
In consequence, random mating acts to prevent any change in the allele frequencies.
In conclusion, to measure a population’s baseline genetic state, it must have random mating to be in Hardy-Weinberg equilibrium (Option A).